230 modeli
Combine and rearrange single- or multiple-contact Dupont connectors into a same-pitch bridge. Now with multiple row support! The assemblies can be a bit tight, but still much easier to modify than re-populating a dedicated housing. If…
This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…
I like my jumper cables to have a tight fit, so i adjusted the lenghts and turned it into a single print object. The Skadis hooks can be pushed into the dovetail connection, but be carefull when inserting them, because it is a very tight…
NOTE: Do not print with supports. The model is designed to print without the need for supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 % Thank you @SpiderGod_2164882 & @Chris_Walnut_3378485 for the…
NOTE: Do not print with supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 %
This is dupont connector lock for 1-6 pins . There are variants for 12 and 14mm dupont connector. Initially I used PLA, but the connector is fragile and propably wont withstand reusing. PETG is more suitable , because it is more flexible…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store NOTE: An issue has been identified with the…
The Dupont Wire Organizer System was created to assist fellow Arduino, raspberry pie, robotics and rc enthusiasts stay better organized. My cables were always tossed into bins and they were a pain to take out, so i created these bins so…
I wanted a way to keep my DuPont wires together and organized but wasn't a big fan of the big clunky comb-style organizers. So I made my own! This organizer can hold about 20 to 22 wires at a time. The wires I have are about 195mm long…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Printable 40 pin connector for RaspberryPi. You just insert separate cables (goldpin connectors) inside, put locking bar in and voila. You made yourself a working 40 pin connector and got rid of single plug cables. Never connect to wrong…
A slightly completed version and slightly corrected dimensions. (Remix from https://www.thingiverse.com/thing:5167475) This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Use only with real…
Dupont Cable Management. The fins need to be separated after printing. If you optimize this design please tag me. I would love to see improvements.
A simple remix of NERDCORNER 's Dupont cable connector, this now has a male and a female end, allowing you to use two Dupont connectors similar to a micro JST connector or other small electrical connector. The tab and recess arrangement…
This is for those tiny crimp on dupont connectors that fit inside the plugs that plug into the RAMPS board. Tolerances on this are TIGHT! don't feel bad if you can't print a working one. This isn't going to crush the connector tight but…
I was needing a battery holder, and due to my lack of patience to wait 2 days for the order to arrive, it occurred to me to make a very simple model of battery holder that can be used directly with DuPont cables. The model has two small…
2025 - Use improvded remix https://www.printables.com/model/1185210-gridfinity-dupont-jumper-wire-holder Gridfinity - 6 Length, 1 Width, 3u High. For 200mm DuPoint wires. Requires four 6x2mm to hold the bridges in place.
All sizes of wire holders are compatible with each other Print instructions - wire holder Choose between 100, 150, and 200 mm long Supports everywhere 0.4 nozzle 0.2 layer height 10% infill, any infill pattern is fine Print instructions -…
3d printed Connector for jumper wire (Dupont 12mm) as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
USB adapter to Dupont "female" version. Be careful to insert the Dupont plugs in the right direction as shown on the pictures. This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Printing is…
I printed with the open side up. This is a simplified version based on the REV part .
When prototyping things, I like to use the cables with dupont connectors to join up Arduinos and other bits and pieces. I made these to hold 4 to 7 dupont connectors together in a little bundle. You'll need a well dialled in printer to…
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Fully customisable Gridfinity trays to store your (Dupont) cables. I have been using urish 's Dupont Cable Organizer Customizable for many years now and they are an excellent way to store my breadboard cables. Now, I am switching to…
Like my mini crimper but takes advantage of the way 3D printers print in layers to make a much stronger crimper. This should help you crimp those small Dupont crimps so common in our hobby. The Guillotine style allows you to use one hand…
I needed a solution to store my dupont wires, so I quickly modeled these as a solution to my problem. They have served me well! Each holder requires 2 combs to be printed, which are connected with M5 threaded rods cut to length. The…
Realy usefull connector to have a clean way to connect 4 pin dupont/jumper cables. created by Nerd Corner
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
Some update from the original. You have 2 versions : one with print all in one but the combs/brush is quite weak one in few part with a combs/brush to mount with strong. (You can reduce the size to 99% to be easier to mount on the base)…
Hello, just a remix of Connector housing Dupont 4Pin made by NerdCorner user (thanks for the great job) https://www.thingiverse.com/thing:5233256 ; i remix it in order to my needs, means in my opinion a little bit strong and easy to…
Simple USB to Dupont adapter with positive indicator.
I tried several JST adapter models for connecting BLTouch sensor to an Ender 3v2 board. This model prints easy and works great. I believe you could terminate this “properly” but I simply used super glue: >Remove plastic ends from dupont…
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
Parametric Dupont Cable Comb This comb holds Dupont wires in neat, parallel lines so your cable runs look clean and are easier to trace and debug. Designed in Autodesk Fusion and fully parametric. There is one single row version and one…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Connector for dupont cables to rgb led strip (plug&play style) for all those who do not want to solder or do not know :), super easy to print, only use 1g
Easy to print, no support required. A quick rub between the fingers with some folded 120 grit sandpaper is all that is required. you can choose from plain ends or those with mounting holes preformed. The stand requires a length of 10 mm…
Remixed - The model has two small notches on each side, large enough for the DuPont connector to be firmly inserted between each battery pole and the model. The cable may be a little tight and require a little force to insert, but this…
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
This is a hinged cover for interconnecting Dupont connectors (4-pin). It helps prevent the connector from coming off. You can open and close this cover by the hinge, and locking the cover in the opposite part. Note You can print this…
This is a housing for male inline 2-row Dupont connectors (aka 0.1" / 2.54mm pin headers). It is intended to hold and protect the male side and provide keying to avoid connection in the flipped orientation. There are 2 parts; the housing…
this fits an 8 pin dupont connector. was going to be used for a connection on my printer but ended up not working.
Resized to fit Elegoo Dupont cables.
This little gadget is small, simple but powerful. I made this one because I needed customized display cables for my projects, which I usually make myself using Dupont connectors. Those connectors come with the benefit that they're pretty…
A simple holder for 2.54mm dupont style connectors. Connector dimensions 2.54×2.54×12mm. If it's too tight, and you are using Cura, try setting horizontal expansion to -0.05mm. The walls thickness (0.8mm) is optimized for 0.4 nozzle.…
Easy way to transform your Dupont cables for JST XH 2.54mm sockets. Print in PLA or PETG. No support needed. Freecad file is included.
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
3d printed Connector for jumper wire 12mm Dupont as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
dupont contact holder for generic crimp tool. I printed with 0.4nozzle, 0.2 layer h. the screw will need to come from the other side, but it still works and makes crimping quick and easy Ideally the pin slot should be pretty tight. if…
Resizeable Jumper Wire Holder, flat heavy base for work benches. ( Not 100% sure the modifier will work outside of bambu/orca slicer )
I needed a 4 pin connector to make a WLED strip connection and designed one from scratch using Dupont terminals.
DuPont wires commonly used in Arduino\Raspberry Pis now have a group connector. This is a 24 pin wire block that can be plugged in or out, retaining the order of the wires. Wires can be reclaimed and used for other projects simply by…
This is a remix of https://www.thingiverse.com/make:998505
Connector housing, Dupont 2Pin Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/f3ktpdrg2DT-dupont-crimping-tool-multiboard-holder Print instructions…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ https://nerd-corner.com/dupont-connector-v1-1/
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Designed and printed in PETG, but it is intentionally a tight fit so you may have to scale it up a bit for ABS. I am not really good with soldering, but fortunately plenty of vendors offer the Raspberry Pi Pico with pre-soldered and even…
I like the changes Funkenjaeger made to the gridfinity DuPont jumper wire holder, but I also like the Gridfinity Ultra Light Bins by HuMa. This combines both.
Connector housing Dupont 4Pin Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
This was inspired by Zack Freedman's Gridfinity project. My take on a Dupont wire holder for Gridfinity. The slots are tapered to hold wires better. I created using Onshape . Added step files for easy changes.
Descripción Diseño de Hernández y Fernández de Tintín a 4 colores impreso con AMS “boca abajo” con lámina PEI texturizada. -------------- Otros diseños: Tintín y Milú: https://www.printables.com/es/model/647590-tintin-y-milu Capitán…
I needed a way to take 4 individual Dupont connectors and consolidate them into a single 4-pin connector. This little piece does the trick. Hope it helps you as well! I included two sizes so use whichever one best meets your needs. STEP…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Modifications for usability, see differences listed below
Update Feb 17 2025 Moved the original files with a 0.1mm tolerance to their own folder Uploaded new files with a 0.2mm tolerance Dupont connectors are 2.54mm Openings are 2.74mm Added Configurations 1x3 with filled-in center pin (useful…
Molykote compound and other types of greases sometimes come in tubes without additional nozzles for finer dispensing. It is best printed with PP filament and a .25 nozzle. The model has a brim under which Scotch tape should be put. The…
Background : I needed to cut down some female Dupont headers and found the jig by Nikki81 . It worked well, but I wanted to make some minor tweaks so I created a parametric design in Fusion 360 that allows you to adjust things like the…
This is a double compartment cylinder box that snaps together shut to allow transportation of dupont cables. I had the specific need so I build the box, the two half snap together snug. Maybe a bit too snug as you will certainly need a…
One of the biggest differences between proper OEM crimp tools and the cheap ones is the presence or lack of a locator that holds the crimp terminal in place at the proper depth, and allowing the wire to be inserted with the jaws wide…
These tiny items fit into Dupont(R)-style pin header housings to prevent plugging it in unless a pin has been omitted in that location. This allows reasonable polarization protection while using common 0.1" (2.54mm) pin headers that…
A typical 2-row 2.54mm ribbon-cable connector is female. That is, the part on the cable has holes, the part on the PCB has pins. I needed a special application where where the part on the cable has the pins. Those are rare to get. However…
Mount multiple Dupont 4- or 2-pin Connectors
Remplissage : 5% Imprimé sans support. Epaisseur de couche 0.2mm
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
I needed a dupont wire organizer with proper wall mounts. I also need the wires easily taken off the wall and sometimes I need to take them with me. None of the models I found met the requirements so I designed my own. This design has the…
This is a hybrid connector that allows you to plug standard 4-pin PWM fans into four DuPont pin headers . It is a perfect solution for connecting PC fans to ESP32s, Arduinos, Raspberry, or breadboards without cutting wires. This model…
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ https://nerd-corner.com/dupont-connector-v1-1/
Simple remix to allow 1x3 DuPont connectors through the hole. The top available in the original model.
Vytiskněte si jeden spodek a dva boky a potom je sešroubujte samořeznými šroubky. Díra pro šroubek je schválně malá, aby jste si ji převrtali dle potřeby.
Liked the original but it was a little bit too long, so I shortened it a bit and made the snapping mechanism better.
1x4 Gridfinity dupont cable storage 75-120-160mm
this is one of those things that should not exist, don't print this! it doesn't matter that does not require supports or that is made for 0.4mm nozzle at, its wrong and you know it
Gridfinity Dupont Cable Box with Locking Mechanism This custom-designed Gridfinity box is ideal for organizing Dupont cables. Available in two sizes (3x1x5 and 3x1x6), it fits seamlessly into the Gridfinity system. Features: Rotating Lock…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Dupont cable organizer short and long without label, can be good for other types of cables or combinations.
Made this to make my 18650 and the connected modules “pocket proof”. (https://www.printables.com/model/383680-modular-18650-battery-holder-cap) You can put a double DuPont connector pair in it, slide the cover on top. Locks into place…
12mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
ST Dupont lighter stand or display purposes. Can be nice to have the collection presented on the same displays. The lighter displayed is a Ligne1 Full size, so should fit most models. (There is one without branding for when you got other…
This is a work in progress! BDM board/frame & probe pens I designed the probe pens to fit standard dupont cables/connectors. The heads of the connectors are 3mm wide, so the square opening to fit them in is slightly wider to accommodate…
Basically just needed a shorter version of this. Having used the original 40 way design a couple of times (it works fantastically), I needed to hook up a waveshare 35a display. Turns out the plug body is perfectly fine for holding pins as…
Thermistor had a dupont wire but board had a XH2.54 port. This piece is a converter to use the crimp connector from a dupont connector in an XH2.54 shell. Might be material stuck in the hole & tolerances are quite tight. Printed with 0.15…
Many hobbyists like me have a few spare male dupont style jumper cables in their toolbox. This thing to turns those spare cables into articulating probes for your DMM or scope. My design is a remix based on giufini's Octo+ PCB Workstation…
Simple case two connect two DuPont connectors on each side: 2 males on one side, two females on the other. Designed to be able to connect and disconnect a water level sensor to a controller.
This is a remix of the original Dupont Holder design . I wanted a way to keep my Dupont terminals organized, especially since they were just hanging around. After testing a few ideas, I decided to keep three connectors side by side for…
This model was built out of a need to extend a IDC connector on a main board outside of a case using a 2.54mm pitch “DuPont” connector. It has two main functions: Protect the exposed pins from accidental damage. Provide additional area to…
