1 / 2
Nozzle for Dupont Molykote compound tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzles for finer dispensing of Molykote compound and other types of greases from tubes.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 512
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (1)Kolekcje (18)Powiązane
Molykote compound and other types of greases sometimes come in tubes without additional nozzles for finer dispensing. It is best printed with PP filament and a .25 nozzle.
The model has a brim under which Scotch tape should be put. The bed temp can then be room temperature or a bit higher - no need for 100 degrees as the Prusaslicer suggests. The model contains two nozzles - you can remove one in Prusaslicer.
The fit is tight but that is intentional to prevent backflow.
