Dupont connector clamp/holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When prototyping things, I like to use the cables with dupont connectors to join up Arduinos and other bits and…
- Ocena
- 4,5 / 5
- Polubienia
- 59
- Pobrania
- 372
- Wydruki
- 3
- Wyświetlenia
- 1781
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When prototyping things, I like to use the cables with dupont connectors to join up Arduinos and other bits and pieces. I made these to hold 4 to 7 dupont connectors together in a little bundle.
You'll need a well dialled in printer to print these. I printed them in ABS as they need a little bit of flex to work well. The gap between the latch sides is 0.2mm. The 4 connector piece may also be pretty tight as there's not much space for flexing the sides.
Updated to include dupont connectors in 2 rows.
Category: Electronics