Dupont / Jumper Cable - Male/Female
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dupont connectors with an added tab and hole arrangement, similar to micro JST connectors.
- Ocena
- 5 / 5
- Polubienia
- 229
- Pobrania
- 610
- Wydruki
- 4
- Wyświetlenia
- 3845
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple remix of NERDCORNER's Dupont cable connector, this now has a male and a female end, allowing you to use two Dupont connectors similar to a micro JST connector or other small electrical connector. The tab and recess arrangement helps to prevent accidentally connecting it the wrong way round, and it fits snugly enough onto a Dupont connector that glue isn't required (or wasn't for me, at least).
Note that this isn't 100% foolproof - if you press the connectors together with enough force, it is still possible to connect them the wrong way round.
Suggested print settings:
0.1mm - 0.15mm layer height (0.2mm will work but the tabs that click the top & bottom together don't print as well)
0.8mm or higher wall width
Support/Brim: No
Print:
1x Dupont_Female_bottom
1x Dupont_Male_bottom
2x Dupont_top
then insert two Dupont connectors into the bottom pieces, and press the top on firmly.