Dupont / Jumper Cable - Male/Female
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dupont connectors with an added tab and hole arrangement, similar to micro JST connectors.
- Rating
- 5 / 5
- Likes
- 229
- Downloads
- 610
- Makes
- 4
- Views
- 3,845
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A simple remix of NERDCORNER's Dupont cable connector, this now has a male and a female end, allowing you to use two Dupont connectors similar to a micro JST connector or other small electrical connector. The tab and recess arrangement helps to prevent accidentally connecting it the wrong way round, and it fits snugly enough onto a Dupont connector that glue isn't required (or wasn't for me, at least).
Note that this isn't 100% foolproof - if you press the connectors together with enough force, it is still possible to connect them the wrong way round.
Suggested print settings:
0.1mm - 0.15mm layer height (0.2mm will work but the tabs that click the top & bottom together don't print as well)
0.8mm or higher wall width
Support/Brim: No
Print:
1x Dupont_Female_bottom
1x Dupont_Male_bottom
2x Dupont_top
then insert two Dupont connectors into the bottom pieces, and press the top on firmly.