1 / 6
Dupont Jumper Wire Bundlers for Multi-Pin Connectors (TPU) — zdjęcie 1
1 / 6

Dupont Jumper Wire Bundlers for Multi-Pin Connectors (TPU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Create multiple-pin connectors and headers using standard Arduino jumper wires. Designed for flexible filament.

Ocena
5 / 5
Polubienia
24
Pobrania
112
Wydruki
1
Wyświetlenia
535
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Update Feb 17 2025

  • Moved the original files with a 0.1mm tolerance to their own folder
  • Uploaded new files with a 0.2mm tolerance
    • Dupont connectors are 2.54mm
    • Openings are 2.74mm
  • Added Configurations
    • 1x3 with filled-in center pin (useful to connect to Arduino Nano power pins)
    • 1x4 with filled-in 2nd pin (useful to connect to Arduino Nano Serial I/O pins) 

 

I needed to test some new 14-segment displays. It's a pain holding the 5 jumper pins in the right order to temporarily apply them to each display to check it. I designed small bundling adapters that be be used to group pins together semi-permanently.

Designed with little tolerance, to be printed in a flexible filament like TPU.

Included configurations:

  • 1x1 1x2 1x3 1x4 1x5 1x6 1x7 1x8 1x9 1x10
  • 2x2 2x3 2x4 2x5 2x6

If it's a tight fit, use a small flat blade screw driver or a vise to shove the pins in, center pins last if needed.

Sources: https://www.tinkercad.com/things/hYwlOyKuvnU-dupont-jumper-bundlers-v2