Dupont Jumper Wire Bundlers for Multi-Pin Connectors (TPU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Create multiple-pin connectors and headers using standard Arduino jumper wires. Designed for flexible filament.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 112
- Makes
- 1
- Views
- 531
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Update Feb 17 2025
- Moved the original files with a 0.1mm tolerance to their own folder
- Uploaded new files with a 0.2mm tolerance
- Dupont connectors are 2.54mm
- Openings are 2.74mm
- Added Configurations
- 1x3 with filled-in center pin (useful to connect to Arduino Nano power pins)
- 1x4 with filled-in 2nd pin (useful to connect to Arduino Nano Serial I/O pins)
I needed to test some new 14-segment displays. It's a pain holding the 5 jumper pins in the right order to temporarily apply them to each display to check it. I designed small bundling adapters that be be used to group pins together semi-permanently.
Designed with little tolerance, to be printed in a flexible filament like TPU.
Included configurations:
- 1x1 1x2 1x3 1x4 1x5 1x6 1x7 1x8 1x9 1x10
- 2x2 2x3 2x4 2x5 2x6
If it's a tight fit, use a small flat blade screw driver or a vise to shove the pins in, center pins last if needed.
Sources: https://www.tinkercad.com/things/hYwlOyKuvnU-dupont-jumper-bundlers-v2