1 / 20
Dupont connector 2.54mm pin holder with generator — zdjęcie 1
1 / 20

Dupont connector 2.54mm pin holder with generator

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple holder for 2.54mm dupont style connectors. Connector dimensions 2.54×2.54×12mm. If it's too tight, and you…

Ocena
5 / 5
Polubienia
30
Pobrania
192
Wydruki
1
Wyświetlenia
1277
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

A simple holder for 2.54mm dupont style connectors. Connector dimensions 2.54×2.54×12mm. If it's too tight, and you are using Cura, try setting horizontal expansion to -0.05mm. The walls thickness (0.8mm) is optimized for 0.4 nozzle.

Update:
I added a some variations as I've got 12mm and 14mm long connectors for some reason.

Released a OpenSCAD generator that features mounting holes and zip tie mounts.

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2 or lower

Infill:

100%


Filament:

Any Any

Notes:

Print horizontally on bed

Category: Electronics

Tagi