1 / 3
SKADIS Nor-Tec Thermometer holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple holder that uses the T-Nut mounting system to mount a Nor-Tec Thermometer from Action on a Skadis board
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This is a simple holder I threw together in TinkerCAD for a Nor-Tec thermometer from Action. I wanted a way to mount it to my IKEA SKÅDIS board and nothing I could find would really work for this cheap thermometer. It comes with two 8 mm magnets on the back
I used a M2 screw because I don't have M2.5, and for this the added strength of M2.5 isn't needed anyway
The Skadis T-Nuts Mounting System for Ikea Skadis Pegboards (or STNMSfISP for short :) ) is made by user @6d6178
- https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb
- https://www.printables.com/@6d6178
Required hardware:
- 1x M2x12
- 1x M2 nut + M2 T-Nut
- 2x 8x3 mm magnet
- Superglue
- Nor-Tec Thermometer (https://www.action.com/nl-nl/p/3206539/nor-tec-binnen-thermometer/)
Printing Recommendations:
- Just use your leftover filament :)