SandPiper 1:8 (by Black Crow) - Modded gearbox - SCT Sidewinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modded gearbox for the SandPiper 1:8 (by Black Crow) to fit a SCT Sidewinder
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 754
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a modded gearbox for the SandPiper 1:8 (by Black Crow) to fit a SCT Sidewinder.
This motor is high KV (3800), so i run and 2S, with greater gear ratio, and smaller 95mm tires.
With this configuration, this is drivable, the motor is cold and the car is a beast. Battery life is good, I have 30 minutes of bashing with a 5200mah 2s battery.
This can probably be used with other motors, but it remain untested.
Build use
- 14T motor pulley
- 54T output pulley (can be hard to find)
- 156mm GT2 belt
This use the same build process as the original gearbox. Use two M3 short screw inside the gearbox to hold the motor during assembly, and 4 M3 long screws to reach to motor through to gearbox and the cover.