Magnetic fixture for the Tradfri Movement Sensor of IKEA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A light weight but strong solution for fixing IKEA's Tradfri movement sensor to a steel surface.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v2.0
Magnetic Fixture for the Movement Sensor of IKEA
A light weight but strong solution for fixing IKEA's movement sensor to a steel surface.
This use case is for magnets sized 9.8 mm in height and 6 mm in diameter.
Create your own model (optional)
- Create the bone shaped body with 4 holes each 6 mm in diameter and extrude it 0.8 mm.
- Create an attached cap by following the outline of the top and bottom part of the bone shape.
- Include holes with a diameter of 6 mm and extrude 4.5 mm.
- Create a loose cap with the same dimensions.
- The body and 2 caps can be positioned on the heated bed so that no support is needed.
Construction tips
The tight fit for the magnets is by intent as you don't want them to slide out of the holes.
So when inserting them a decent amount of force is needed.
As the neodymium magnets are very brittle don't use a hammer!
It is better to use something like a glue clamp to squeeze them in gently.
Because the body is warped a bit when placed in the sensor it is recommended to print in PETG. However, it is my assumption that PLA will work just as well.