gridfinity 1x2 cardan joint and reduction step bin sae
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket
Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket.
Used with 1/2" drive ratchet.
Print “standing” with 10% gyroid/grid infill and no support.
You can hang it on a peg board or wall with the gridfinity 2x5 holder, also available here on Printabels.
This brings the modula and gridfinity universe together.
MODULA - a module based tool holder system
The idea is a adapter plate (metric/imperial/plain) that attaches to peg board/wall, then a module snaps on to this adapter with dovetails.
Why use an adapter? Everyone can share the modules worldwide, and just adjust the adapter plate for their environment.
This module attaches to the adapater biltema or the vanilla adapter available here on Printables. The vanilla adapter can be modified so it fits wherever You need to hang these modules.
