1 / 2
Levoit Hybrid Ultrasonic Humidifier - Water Tank Gasket (TPU) — zdjęcie 1
1 / 2

Levoit Hybrid Ultrasonic Humidifier - Water Tank Gasket (TPU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU replacement for the silicon gasket that goes under the lid of the water tank cap.

Ocena
0 / 5
Polubienia
1
Pobrania
31
Wydruki
0
Wyświetlenia
412
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a TPU replacement for the silicon gasket that goes under the lid of the water tank cap. I thrifted one that was missing it and of course it leaked, so this was a quick design that's been working perfectly. This is for the Levoit Hybrid Ultrasonic Humidifier, model LV600HH. 

As it's TPU, might need a slight bit of cleaning up post-print. I installed it shiny (build plate) side facing out per the pictures. 

Printed on a Prusa MK3S on generic FLEX settings at 15% infill, 2 permitters. ~45 min, 4.44g used. 

Tagi