1 / 2
Levoit Hybrid Ultrasonic Humidifier - Water Tank Gasket (TPU) — image 1
1 / 2

Levoit Hybrid Ultrasonic Humidifier - Water Tank Gasket (TPU)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

TPU replacement for the silicon gasket that goes under the lid of the water tank cap.

Rating
0 / 5
Likes
1
Downloads
32
Makes
0
Views
416
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a TPU replacement for the silicon gasket that goes under the lid of the water tank cap. I thrifted one that was missing it and of course it leaked, so this was a quick design that's been working perfectly. This is for the Levoit Hybrid Ultrasonic Humidifier, model LV600HH. 

As it's TPU, might need a slight bit of cleaning up post-print. I installed it shiny (build plate) side facing out per the pictures. 

Printed on a Prusa MK3S on generic FLEX settings at 15% infill, 2 permitters. ~45 min, 4.44g used. 

Tags