Counting matching models…
I was frustrated that the LVAC-200 - while being a pretty good vacuum - was a bit lacking in the organization department. It only comes with a wall hook for hanging the vacuum itself, nothing for the two nozzles or the stick & vacuum head…
The Levoit cordless vacuum cleaner is only supplied with a simple wall bracket that does not integrate the accessories or the power supply. I have designed a model that adds exactly these functions to the wall bracket. - Holder for power…
Levoit air purifier horizontal stand, make a fan from your air purifier.
Angled at 40 degrees to blow the mist away from the humidifier instead of falling back on top of the table. The nozzle diameter is 11.7mm, which matches the flow area in the stock nozzle as best as I could measure.
An Affordable HEPA Filter using Core 300 filters and a 120mm fan What you need: Printed Adapter 120mm fan w/ AC Power adapter if needed Core 300 Filter M4 nuts and bolts
This is my first real attempt at creating a model. Few attempts and changes leading to this v3 version that is a friction fit for the filter. 10mm standoffs keep the filter and fans separated to allow the airflow to spread out to use the…
Update 1 Added a 6x3 magnet version for the carbon container, you will not need the turning tool anymore and instead will need to source 8 to 10 6x3 magnets. Removing the lid can be easily done by using some tweezers inserted into the…
The updated design optimizes airflow and efficiency by making better use of the cylindrical air filter’s surface area. Please note that this is specifically designed for the Levoit Core Mini Air Purifier, not other Core models, such as…
Original the air of this purifier would come out on top, blowing straight up. I wanted it to blow forward to create a better air circulation. This air deflector is being installed by simply pushing it into the vent cover.
I needed a way to safely vent the fumes from my enclosure and realised that my old air purifier would be perfect as it has both a HEPA filter and an active carbon filter. This set replaces the bottom cover for the air purifier with a…
I just got the purifier today, and I was anxious to get it off my worksurface while keeping it very near the ABS-printer. Pulling only the top portion of the referenced design from ThreeDeeByRusty, I knocked together a wall mount bracket…
Two-part accessory mount allows the Levoit LVAC-200 attachments to be mounted onboard the appliance itself for quick use, instead of stashed away in a fixed location. I've always found that I don't spend the time to go get the attachments…
Top and adapters to conect to levoit humidifier to redirect the steam stream
This is a stand for the popular LEVOIT Core Mini-P Air Purifier . It raises the top of the air purifier to about seat level, so it works well under a desk. The stand sockets into the bottom depressions of the Levoit Core Mini-P so it…
Made a stylish and airflow oriented HEPA filter case with an 140mm Fan. Perfect if u just need a thing that works and u can repair broken parts (in this case only the fan?) with ease. Case has a thread in the top & case part for holding…
Nothing too fancy here. I'll say it gets the intended job done. This is for the Levoit Air Purifier 6.5"D x 6.5"W x 10.4"H https://www.amazon.com/dp/B09GTRVJQM?ref=ppx_yo2ov_dt_b_product_details&th=1 There are a few file variations…
I do have space on the Floor for my AIR Purifier from LEVOIT. So i made a spring loaded insert for a Ikea Kallax. Since there is space in the back, air circulation should not be a problem. And since the Sensor is not giving accurate…
There's not a lot to say - the stream of "steam" from the top of the humidifier is just perfect for this kind of model! This fits this LEVOIT humidifier but is a parametric model, so you may be able to adapt it to other models. Printing…
"Mini" Version Here ⚠ Please print the test piece first to ensure this will fit around your Core 300!! ⚠ Print Time This print, using a 28mm layer height, will take approximately 14 hours and require 250 grams of filament. Recommended…
Not needed for tightening, but sometimes helpful for loosening especially for people with arthritis, etc
Printed with PETG and PLA, 0.6 Nozzle, Tree Supports. Works fine for me
This is a TPU replacement for the silicon gasket that goes under the lid of the water tank cap. I thrifted one that was missing it and of course it leaked, so this was a quick design that's been working perfectly. This is for the Levoit…
Make your own air purifier with a 120mm PC fan. this is specifically designed to clip to my own filament rack storage system. However you can use it separately and not print the clip parts. You can use electrical tape to make up for any…
This little marvel of technology has really improved the air quality in my room, and I don't want to take it out of the room anymore. Reason enough to give this device a stylish look and fit it with a proper stand. Not only does this make…
The water tank caps are extremely difficult to remove after the tank is emptied on the Levoit humidifiers because there is nothing to really grab onto. This seems to be independent of how hard the cap is tightened when the tank is filled.…
This could be a replacement casing where one has been lost or broken. It's for the Levoit Smart HEPA Air Purifier 200S specifically. I managed to buy a Levoit 200S from Ebay, because the owner had lost the bottom part of the unit which…
Replacement cap for my Levoit humidifier LV600HH Probably fits other models. Dog decided the cap was a toy and destroyed it. printed it upside down with supports for the middle part. I used PETG Keep in mind this humidifier does has a…
A humidifier tank opener for the Levoit 6L humidifier tank. The cap is nearly impossible to remove when wet without this. Print with no supports: bottom part upside down, handle on its side. Use two M3 screws to connect the two parts, you…
it is a relatively short print and is an easy print, it allows you to put essential oils on a cotton pad then in the holder grid to allow air to pass over and through it to improve air quality and smell without chemicals as a Febreze…
Mine was vibrating a lot through the floor. Print in a soft and flexible filament --- I used 85A TPU. You will need to mirror one across the X-axis when printing for both sides! I ended up flipping it upside down also (i.e., print with…
The best and beautifull christmas decoration
Same thing as the full version, just the necessary bit. I left two holes at the top and bottom so you can use straps to hold it down.
broke mine like a dummy so here
Filter holder and 100mm tube adapter for 190mm Levoit LV-H132 filterx
My new, but ultra-basic humidifier (LEVOIT Top Fill with 2.5L Tank, https://tinyurl.com/4t66ww84 ) does not have any ability to use essential oils for therapeutic or other mood-setting(?) purposes, and the instructions explicitly state…
Purifier made from 4 or 6 140mm PC fans with Levoit Vital 200S filters. In my case, i used P14 ARCTIC fans, with ESP32 to change RPM. (MQTT with FUXA dashboard in my case). If you want to use only 4 fans, you can tape some cardboard over…
This is a custom wall mount bracket set (left and right holders) designed specifically for the Levoit Vital 100S air purifier . These brackets allow you to securely mount your air purifier to a wall, freeing up floor space while…
This could be a replacement casing where one has been lost or broken. It's for the Levoit Smart HEPA Air Purifier 200S specifically. I managed to buy a Levoit 200S from Ebay, because the owner had lost the bottom part of the unit which…
Made a few changes for my use: Changed cord clips for round cord. Thickened back to move away from the wall by a 3mm. Made it easier for tube to clip in by making the wall thinner.
Resized the flange that clips into the body of the filter, works great.
I wanted to redirect a bit more the Filtered air of my LEVOIT Air Filter. This helps
Levoit Air Humidifier - nozzle replacement for 20mm hose connection
Kit to build a filter using a Lvac200 filter from levoit, a small fan, and some M4 screws. I built two versions using the most commonly used fans, easily found in electronics stores. The “Power” version is the most effective.
Swivel stand assembly for a Levoit Core 300 allowing the air output to be directed as desired. Even though I designed it around my Core 300-P, the clamp ring assembly should fit any cylindrical air filter with a body diameter of approx…
Custom PCB, 3D Printed Parts and Firmware (ESPHome-based) to smartify the Levoit Mini Air Purifier Features Custom Firmware and PCB for the Levoit Mini - Non destructive and fully reversable. Home Assistant integration as Fan 3 Speeds…
I made three versions: Universal - Print this if you want flexibility on which holder you place the upholstery holder (this is what I printed for myself). It has the the rear cutout for the upholstery cleaner on both accessory holders. It…
This is a wall-mounted holder for the two original accessories that come with the Levoit LVAC-200 cordless vacuum cleaner . The mount keeps both accessories neatly organized and easily accessible, instead of lying around or taking space…
@PrusaFan123's model fit fine, but it only allows 1 tool to be attached. In addition, the tool attaches to the back of the vacuum, which prevents me from laying the vacuum horizontal to the ground. I tend to vacuum under beds, couches,…
This is a custom wall mount bracket set (left and right holders) designed specifically for the Levoit Vital 100S air purifier . These brackets allow you to securely mount your air purifier to a wall, freeing up floor space while…
4" duct collar on an ~8" curved base designed to roughly fit the Levoit Core 200S-P Air Purifier. This was designed with the intention to fit two or more collars on the air purifier to make branch lines that can connect to multiple zones…
4" duct collar on an ~8" curved base designed to roughly fit the Levoit Core 200S-P Air Purifier. This was designed with the intention to fit two or more collars on the air purifier to make branch lines that can connect to multiple zones…
Designed by Samuel Meppen, Nassau Computer Repairs LLC. Designed for use with the Levoit Core 200S-P Air Purifier: https://levoit.com/products/core-200s-p-smart-air-purifier Allows a 8" HVAC Piece to fit the top of the air purifier. To…
I didn't change the design of the Levoit Core 300 activated carbon insert but I created a ring to make a tight fit for the carbon insert so air could not bypass the activated carbon. I have been able to pull it back out of the filter but…
Levoit Core 300S - Upgraded Bottom Cover (Cable Management & Legs) Transform your Levoit Core 300S air purifier into a stylish piece of furniture with this upgraded replacement bottom cover. Key Features: Cable Management: Features a…
The idea for this design was suggested by MadMopar (over on MakerWorld), since he wanted to use the " Perfect Poor Man's Filter " by MrFunctionalPrint (also over on MW), but it would not fit on a P1 without using a split model. I really…
My room does not have good ventilation and I have to run a large 500cfm fan through a duct to a small gap in the only window of my workshop so I am always looking at ways to filter the air from printing and especially since I started to…
I needed an air filter for the bus I live in and it needed to be able to mount to the wall out of the way. The clips on this design make it robust when assembled but easily disassembled when its time to replace the filter. Electronics I…
