1 / 2
140mm Fan enclosure with Levoit Vital 200S filters
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY air purifier made from 4 or 6 140mm PC fans.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Purifier made from 4 or 6 140mm PC fans with Levoit Vital 200S filters. In my case, i used P14 ARCTIC fans, with ESP32 to change RPM. (MQTT with FUXA dashboard in my case).
If you want to use only 4 fans, you can tape some cardboard over the top and the bottom.
I would recommend to tape any holes for best efficiency.
For side fans : print 2x side1 and 2x side2 with 2x c_plate
For top fans : print 2x top1 and 2x top2
V2 is suitable for various types of 140mm fans
Included full bottom/top files, but cardboard is sufficient