1 / 2
140mm Fan enclosure with Levoit Vital 200S filters
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY air purifier made from 4 or 6 140mm PC fans.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (0)Powiązane
Purifier made from 4 or 6 140mm PC fans with Levoit Vital 200S filters. In my case, i used P14 ARCTIC fans, with ESP32 to change RPM. (MQTT with FUXA dashboard in my case).
If you want to use only 4 fans, you can tape some cardboard over the top and the bottom.
I would recommend to tape any holes for best efficiency.
For side fans : print 2x side1 and 2x side2 with 2x c_plate
For top fans : print 2x top1 and 2x top2
V2 is suitable for various types of 140mm fans
Included full bottom/top files, but cardboard is sufficient