1 / 9
Stash Tray and 1" Sq. Extrusion Stand + Levoit Air Purifier Holder Topper — image 1
1 / 9

Stash Tray and 1" Sq. Extrusion Stand + Levoit Air Purifier Holder Topper

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Needed more surface space + elevate my room air filter. I had a 8" extrusion laying around and this is the result.

Rating
0 / 5
Likes
13
Downloads
46
Makes
0
Views
839
Reviews
0

Updated at source:

Model information

Category
Bedroom
License
Creative Commons — Attribution

Nothing too fancy here. I'll say it gets the intended job done. 

This is for the Levoit Air Purifier 6.5"D x 6.5"W x 10.4"H

https://www.amazon.com/dp/B09GTRVJQM?ref=ppx_yo2ov_dt_b_product_details&th=1

There are a few file variations depending on what you want. I personally like the deep 4 pocket tray the best. It is the strongest however it does take the longest to print.

The tray has holes and channels running in the base from the middle to the corners to allow a chord to pass through the corner along the bottom and up the middle concealing the cable. There are holes in the face of the base to allow hinges and maybe lids for the compartments later.

 

The Levoit Holder has a spot for your spare M3sN and your M3x10 to use as a set screw to keep it from sliding down the extrusion.

Hope you guys like it.

Tags