1 / 4
Employee of the Week Magnetic Frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Employee of the Week magnetic frame
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
As a Work From Home/Remote employee, I've found solace in celebrating the small goofy moments, such as nominating my dogs for Employee of the Week. Hopefully you can enjoy similar moments. :)
Printer Settings:
First layer = .2 mm
Each layer after = .12mm
I used 8mm x 1.8mm magnets (12 total). They fit pretty snugly, but I used standard Loctite/Superglue to secure it. Two holes on the back for a nail to hold, but I didn't make it too deep, as mine is going to lay against a bookshelf.
