RV Extension Cord (Safety) Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for 50amp RV Extension Cord but could be used for 30amp as well.
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 406
- Wydruki
- 0
- Wyświetlenia
- 1827
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is version 1 of an RV extension cord safety cover. This simple design allows one to slip the connected cord in the box and then simply cover. The cord is 3~4" off the ground and the box has ‘weep’ holes in the bottom in case water gets in. The weep holes should be covered with screen material to prevent insects from getting in the box. When I work on the second version, it will be completely waterproof.
Test model printed in PLA with 2 shells and 15% Gyroid infill. The base was printed with organic supports. It should probably be printed in ASA, ABS or PETG.