.308 Magazine Carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a race pouch I made because I couldn't be bothered to buy one.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 577
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
!!UPDATES!!
7/3/26
I have mirrored the model to have the MRD pointing in the correct direction. Also included .step files in case anyone would like to modify them.
________________________________________________________________________________________________________________________________
Works great with the Hek Lok mount which can be found and printed from here: https://www.printables.com/model/512033-hek-lok-a-universal-print-in-place-clamping-belt-a
I used the MRD from this project here (I printed this out of TPU and use a thumbscrew to adjust mag retention): https://www.printables.com/model/358633-double-stack-race-mag-pouch-canik-glock-mp-cz-sig
Used these heat set inserts and screws: https://www.amazon.com/gp/product/B0C4GV8XDX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B09ZHFW3WN/ref=ox_sc_saved_image_5?smid=&th=1
https://www.amazon.com/dp/B0CQW7WWXP?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Should also work with normal Tek-Lok mounts. I may eventually create an adapter plate for canting of the pouch.