Giottos Rocket Air Blaster Duster Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This wall mount holds a large size Giottos Rocket Air Blaster duster bulb. Uses small or medium Command Strips.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I keep accidentally launching this duster bulb off my desk so I made this wall mount to keep it out of the way but within arm's reach.
The duster bulb fits into the holder blower nozzle side down and the mount is sized for the large bulb duster.
For reference, this Giottos large bulb is about 2.39" (60.7mm) in diameter at the widest point but the top mount opening is modeled to be 2.48" (63mm), so any duster under that diameter should fit to varying degrees.
The back section will take up to a single medium size Command Strip but a single small/poster size strip is likely plenty strong enough.
I printed this in PETG with a 0.4mm tip, 0.3mm layer height, 2 walls, and 15% adaptive cubic infill. The part can be printed in the default orientation shown below without supports.
