1 / 9
Vented case for Raspberry Pi 5
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello! Recently i made this case for Raspberry Pi 5 for my friend, hope you enjoy!
I recommend using it with screws but it works just by snap fitting it.
Printed parts:
-x1 Top cover
-x1 Main body
-x4 Legs (optional)
Needed materials:
-x2 M3 inserts
-x2 M3x10 screws
-x4 M2x4 screws
-You might also use washers for those screws.
Check out my other models, thanks!
Assembly:
- You might need to warm up screws before screwing them here as you need to tap those holes when you are putting screws here
