Liczymy pasujące modele…
Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…
Designed using Sketchup Pro. All Sketchup files are available for personal modification using Sketchup. Check out the full build video here: https://youtu.be/yerYsAh5nNQ A few makers have reported that the outer cover does not fit the…
UPDATE 13.12.2022 Added air vents to the gasket, they are designed in a way so its impossible for light to get in. The active cooling on the Pico4 itself is awesome but when the face gasket sits perfectly on your face with the hot air…
Print instructions: Layer height: 0.1 mm Speed: 30 - 50 mm/s Supports: on Material: Preferably black PETG/ABS/ASA, otherwise paint the inside black There are printed threads, ensure your printer and filament are well calibrated.
Reliable keyring for attaching your keys to your belt, backpack or anything else. Inserting the key requires only two moves, followed by a snap. The keys are safe and will not fall out. To unlock, twist the parts at the side diagonal…
Elegoo Centauri Carbon Vented Riser Lock. Fits ECC Vented Riser from JesusFreak I remixed this from Squeemeister This lock holds the vent closed or open. Uses raised wedges on the top of each end to mechanically hold itself in place. Two…
The Bigscreen Beyond 2 with eyetracking is a bit warm on the face. This allows for airflow while still blocking light from entering. This is only the template stamp, you'll have to supply your own face scan or, at the very least, estimate…
Offset funnel for tight spots like adding oil to engine. Spout diameter is 32.5 mm to 27.5 mm
I already designed the non-vented JessEm Compatible Ring Inserts for Router Lifts so I was asked to make them vented so people could use them with their downdraft router table. So I did. They should be completely compatible, just as the…
This is a remix of the Arducam B0205 1080P Day & Night Vision USB Camera Case that has been customized for use with virtual reality headsets. For required hardware and specific printing instructions, observe the original posting of this…
Created Pop Base with vent holes. Looks great printed in glow in the dark PETG. Sunlu - White (Glows Blue). Slowed the print down. Made for a friend so he can display a Tron figure in his gaming tower.
A compact two-part case for the Synaptics CoralBoard SL, designed in Autodesk Fusion directly around Coral's official reference CAD (printables.com/model/1859306), so every connector lines up with the real board. FEATURES Snap-fit lid: a…
Small Vented Funnel If you dont own a 3D Printer I have them for sale on our Etsy https://www.ebay.com/itm/196549856815
This is a shroud to cut down on glare from a hanging LED that's not covered by a shroud/reflector already. This is designed around the Amazon Basics 60 watt equivalent LED bulb. You should be able to scale in your slicer for larger LED…
Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…
If you experience issues with oil seeping through the spindle seals on your John Deere 110TLB, the issue may be pressure building as the oil warms up. This is especially problematic during winter when the tractor operates in freezing…
This model is of a small funnel with an integrated vent. The vent allows air to escape the container at the same time powder or liquid enters the container. The vent lets air out just below the handle. The smaller funnel in the pictures…
I printed the insert in TPU though I am sure PLA is just as fine.
My LM2596 boards use standard electrolytic capacitors, which are subsequently taller than the solid caps on other varieties. I tried a few different models, but they were all a little too short for my boards to fit. This model on Cults…
This is a WORK IN PROGRESS . I'm still in the testing and tweaking phase, but the parts should be usable. If you encounter issues, please let me know. This lid riser is for the Creality Ender 5 Max to stop the cables dragging on the…
Quick remix of the side panel with multiboard to also have vents. Needs to be printed with supports on the bottom of the multiboard for clean print.
This is a TPU top seal for the 'Elegoo Centauri Carbon Vented Riser' by JesusFreak. Printing notes You will need to print 4 total panel seal pieces and 4 of the corners, like JF's model these are directional, but unlike JF's model, they…
Elegoo Centauri Carbon Vented Riser Lock. Fits ECC Vented Riser from JesusFreak I remixed this from Squeemeister This lock holds the vent closed or open. Uses raised wedges on the top of each end to mechanically hold itself in place. Two…
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
ATX PSU back plate - 2 PSU positions for air circulation Bottom plate adapted for 120mm fan Rubber TPU Feet + standoffs
I initially printed out the spool holder panel and slider along with the right side corners. Everything fit great, printed panel with ASA and slider with PETG. Made the slight redesign to remove the risk of catching anything on the…
Taller, stronger, easier to print. Now with bowden passthrough. Print the sides and corners standing up. The pins and louvers can lay flat on the bed. In reality, the pins are just there to help line it up for acetone welding when printed…
For Non Vented Version Please See, https://www.printables.com/model/1652444-qidi-max-4-non-vented-riser-by-sac3d Vented Riser for Qidi Max 4. Tested in PLA and PETG. Allows the glass to slide as intended. Test printed in both PLA and…
Offset funnel for tight spots like adding oil to engine. Spout diameter is 32.5 mm to 27.5 mm
I wanted the vents to hold closed (on Jesus Freaks' original model) during heavy vibration prints so I designed this small lock piece that slots into the vented riser to hold them in the closed position.
Creality Dry Box 2.0 - Desiccant Drying Basket with Lid (Remix) Thank you, Immodal , for the original model, and for providing a STEP file to make editing easier! I always encourage everyone to provide a STEP file when they share their…
QIDI MAX 4 NON-VENTED RISER BY SAC3D For Vented Version Please See, https://www.printables.com/model/1604271-qidi-max-4-vented-riser-by-sac3d Non Vented Riser for Qidi Max 4. Tested in PLA and PETG. Allows glass to slide as intended.…
Created Pop Base with vent holes. Looks great printed in glow in the dark PETG. Sunlu - White (Glows Blue). Slowed the print down. Made for a friend so he can display a Tron figure in his gaming tower.
UPDATED: The Vented Version is considered the current version and can be used for vented or non vented but it's a little easier to assemble. The reversed thread knob is for for the right side of the non vented files so you probably will…
This is a printed lid for the AD5M enclosure kit that includes a mount for a 120mm fan. Idea being to then add a duct and direct exhaust air safely out a window or something when working with ABS or ASA. I printed mine in 0.24mm, with 3…
A remix of the awesome lid. I printed it in black ASA GF filament.
Created some vents with a "ripple" on the top to let the RGB light shine through
This project builds upon Tyler's enclosure system to adapt to resin printing. It is a very large enclosure, 36"x36"x28" to accommodate the upward lifting cover of resin printers. The main purpose is to vent the toxic resin VOC's to the…
Remix of a remix. I wanted to print a wall mount for my Switch 2. Found a base version, one with ventilation holes, and one with a cartridge holder. To my surprise, there wasn't any that combined both... until now! Recommend to print in…
Centauri Carbon Vented Riser with Filament Feed Slot - Remix has the painted support blockers on the slotted rear riser part (removes the need to manually paint the support blockers on the slotted rear riser part of the model, using this…
Same point as the original, this is remixed from ( DeLonghi espresso machine pre-ground coffee funnel cap by Petclaud - Thingiverse ) . Useful if machine is used in a shared area by people that may mistake the grounds funnel as the bean…
Vented riser for Flashforge AD5M, modified from this design to not interfere with spool holder. I also added a magnetic connector: press-fit ½" neodymium magnets into the recesses (I bought them at Home Depot). If you don't want to use…
These self venting threaded funnels attach positively to most soda and water bottle threads. They are especially useful for filling bottles with liquids that you don't want to spill, such as old motor oil, fuel, etc. The vents insure…
Simple funnel. Should be easy to print without supports with .20 mm layer height. Category: Kitchen & Dining
Small Vented Funnel If you dont own a 3D Printer I have them for sale on our Etsy https://www.ebay.com/itm/196549856815
This is designed to fit the irregular top on a bell aquarium, as the top was not perfectly round. It has 2mm holes to vent, but negate any life from escaping through the holes at least. As my tanks top is oblong, there is a gap in one…
The original basket weave design by psychprod is ingenious, but being me, as soon as I printed it I knew I would like to tweak a few things, and, again being me, the best way to do so would be to remodel the whole thing from scratch...…
SourceOne V4 & Apex - GoPro Hero 11 Mini Mount - Side Load & Vented Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top originally clam shell style. Check him out at: https://www.youtube.com/c/PokeyFPV Category: Other
Minor remix of @Founders' nice model (which he remixed from @polmdm's excellent original). Founders intended vertical mounting, but I needed a horizontal mount for under-shelf mounting in an entertainment console. This meant restoring…
I printed mine with it standing on end as you can see in the pics. It printed good for me in this orientation and looks clean. The template is so you can mark and punch holes in the bottom of the fuselage so you can take the VTX in and…
This is a shroud to cut down on glare from a hanging LED that's not covered by a shroud/reflector already. This is designed around the Amazon Basics 60 watt equivalent LED bulb. You should be able to scale in your slicer for larger LED…
Vented Altmill Stepper Motor Cover to help prevent damage to the motor & cabling.
I use the mr funnel for filling my kerosene heater, it's too perfect a fit in the opening though so no air could escape. I made this which is a great friction fit with the funnel and then allows air to escape when filling.
The spool roll is slightly shorted as the two uprights are now slightly closer together. Base of uprights modified to sit on top of vented riser. You need to remove the vent sliders and then this clips on top. Sits quite tightly to the…
This model is compatible with the lego system.
This Raspberry pi case is specifically designed to fit the 3.5 in LCD screen currently available on Amazon for less than $15. CUQI 3.5 Inch Touchscreen for Raspberry Pi There are other similar and will probably work just as well. I added…
I've provided both full models, and a left and right split sub-model. This split model uses filament scraps as locating pins to glue the sub-models into a single piece. I recommend superglue for the connection. Depending on your printer…
Hello! Recently i made this case for Raspberry Pi 5 for my friend, hope you enjoy! I recommend using it with screws but it works just by snap fitting it. Printed parts: -x1 Top cover -x1 Main body -x4 Legs (optional) Needed materials: -x2…
Newly Updated** I took the well thought out generic l298n Case, provided originally in its original form by Atom's Laband, and rebuilt it from the ground up to support a bigger l268 and amended ports. I have included 1 variations: ( My…
First go at making my own model in fusion 360. Just a simple vented, draining orchid pot. At the time of upload, I am still learning my way around 3d printing. Follow best practice.
This is my updated version of the windshiel fluid funnel, modified for those who are dealing with a tighter fit.
This is a remix of muzz64's 'Vented Funnel' - https://www.thingiverse.com/thing:1394000 I wanted a slightly larger version, so I CADD'd my own from scratch. Large opening = 75mm Small opening = 14mm Total height approx. 102mm Walls are…
The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…
Support material required due to the locking dovetail interface, also recommended in the vent slots but may not be necessary. Print 1 each of the risers and slot them together. Print with the risers laid on the build plate standing up as…
- 40in² vented space - No hardware Necessary - Just under 850g of filament for all pieces (2 walls 15% cubic subdivision infill) - Super Glue optional - 10 pieces in total - Spool Riser with cap included - Minimal supports needed - No…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Wing skids for your AR Wing Pro with ventilation. open space created to reduce weight, but still offer space for a RX or other item. Skids align with travel of the aircraft. Use support. Model includes Left and Right. Press fit only, no…
If you experience issues with oil seeping through the spindle seals on your John Deere 110TLB, the issue may be pressure building as the oil warms up. This is especially problematic during winter when the tractor operates in freezing…
My extruder board was overheating, so I made a vented cover to allow it to breathe better.
Based on the original Qidi model, saves about 20g uses 5 mm magnets (check fitting depth, you may require 1 or 2 per side, or just edit the model to fit original 4mm magnets) NOTE - your build area will be reduced by 8mm, so you have to…
A while back I modified the enclosure, I have for my XL to have 80mm fans attached so I can keep the doors closed and not get too hot. I decided to add a filter box which I filled with activated carbon to get rid of any VOC some materials…
My HP Reverb gets warm on my face. I usually need a fan blowing on my face to keep cool while I use VR. This face plate has heat vents. You can install heat sinks on the hot chips to passively vent thru the slots. I have read that similar…
Tactical Funnel, Vented Wide Mouth, 15 cm No supports needed Please LIKE if you download
I finally upgraded to this Qidi Plus 4 printer. The glass top is great, but for low temp prints (PLA, etc), where do you put it? ALSO, my printer is in my garage which gets dusty. So I want the top in place just to reduce dust settling…
Hi all, here is a simple funnel I made for filling travel-sized (95 mL) Listerine bottles from the full-sized (1 L) ones. Thought I'd share it in case anyone was looking to do the same. I'm sure it could be used for other purposes by…
This is a vented riser for the K1 Max, slim and fairly minimal, it has the benefit of being able to adjust the vents from the top without reaching around the back of the printer. It consists of 4 corner pieces that fit together, with a…
A rack shelf for a Mac Mini M4 (2024) in a 10" rack. Includes air vents below the computer and optionally a keystone jack on both sides so rear ports can be routed to the front of the rack.
As I'm building my very first Prusa XL printer from the partially assembled kit and planning to print lot's of ABS and engineering materials I will be probably running the temperature in the enclosure that little bit hotter I'm not sure…
This model is of a small funnel with an integrated vent. The vent allows air to escape the container at the same time powder or liquid enters the container. The vent lets air out just below the handle. The smaller funnel in the pictures…
A variety of vented funnels. Easy to modify in any splicer and STEP file included for import into CAD software. The 35mm version should fit into the Sunlu 1kg resin bottles for easier filtering and cleanup post print.
I printed the insert in TPU though I am sure PLA is just as fine.
Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…
Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…
Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…
I printed a few different server blanks and B3D's were my favorite. I just wanted a slotted vent design to try to keep with ubiquity's design style. I made the wide style first, but decided it wasn't exactly what I liked, then made the…
I needed a cover for an LED power supply to prevent my very inquisitive 3 year old son from being electrocuted. Couldn't find exactly what I was looking for so designed my own (my first design). Fully parametric with as many options as I…
The OEM Electronics Bay Cover is not vented resulting in the MCU temperature rising to >80°C. The motherboard also reads >90°. Prusa does not list maximum temperatures for these components, but such high temperatures cannot be conducive…
Printed in Prusament PLA. If you want a tighter fit for the camera holder dowel pin, wrapping with a few layers of scotch tape works well. edit 05/02/2025 - updated lid and case to fix position of camera ribbon slot, add cut-out for…
Remixed of LuckyBananas riser I was already using the tetto riser but needed a shelf for my S4 dryer and liked LuckyBananas but didn't want to loose the height or venting which I was used to I printed in petg using generic petg settings…
This Stealthburner Vented Cable Cover has been narrowed to fit cleanly with the metal CNC Aluminium Stealthburner assemblies. The vents are quite large and the edges have been slightly thickened. I printed this with 100% infill, 3 or 4…
My sealed light fixtures with Glass shades/diffusers were cooking my LED light bulbs, severely shortening their lifespan. I designed this one to be closed enough to shade/diffuse the light, but open enough to allow free airflow, keeping…
This is a fairly standard sized funnel with two internal vents and a recirved lip to help prevent spills if the funnel is tilted.
Keep your PEI sheet cleaning supplies together with this easy print. Get the microfiber scrubber https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder Print with supports on the bottom for gripper dots. Happy…
I bought these cute little 5v power supplies and wanted a cover for them. I design it in OpenSCAD. Print instructions I used Prusa PLA, print settings .20 mm SPEED MK3, no supports, fill density 20%.…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* A vented funnel optimized for FAST pouring into a 5…
Added some fans to a ubiquiti ocd panel. made three versions. with own material like 8mm m4 hexbolts and m4 x5x6 heated inserts and m3 6mm hexscrews for mounting the adapter to the OCD panel with own material as in point 1 but with an…
Just the small vent clip/ lid closure piece for kmart glass containers. Probably fits more containers out there too. Definitely not microwave or even food safe with pla but it'll at least seal the contents Specifically made it for these…
