Search results: vented

Counting matching models…

Printables

Vented Funnel

Small Vented Funnel If you dont own a 3D Printer I have them for sale on our Etsy https://www.ebay.com/itm/196549856815

Printables

This is a shroud to cut down on glare from a hanging LED that's not covered by a shroud/reflector already. This is designed around the Amazon Basics 60 watt equivalent LED bulb. You should be able to scale in your slicer for larger LED…

Order a print of this model

Printables

Elegoo Centauri Carbon Vented Riser

Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…

Order a print of this model

Printables

John Deere 110TLB vented front axle cap

If you experience issues with oil seeping through the spindle seals on your John Deere 110TLB, the issue may be pressure building as the oil warms up. This is especially problematic during winter when the tractor operates in freezing…

Order a print of this model

Printables

Vented Funnel

This model is of a small funnel with an integrated vent. The vent allows air to escape the container at the same time powder or liquid enters the container. The vent lets air out just below the handle. The smaller funnel in the pictures…

Order a print of this model

Printables

Cat Lover's Vented Funnel

I printed the insert in TPU though I am sure PLA is just as fine.

Order a print of this model

Printables

LM2596 enclosure, vented with 20mm fan, for buck converter

My LM2596 boards use standard electrolytic capacitors, which are subsequently taller than the solid caps on other varieties. I tried a few different models, but they were all a little too short for my boards to fit. This model on Cults…

Order a print of this model

Printables

Sovol Unvented Top Hat

This is the Sovol SV08 Top Extension with the vents closed.

Order a print of this model

Printables

Ender 5 Max Vented Lid Riser - WIP (full release candidate)

This is a WORK IN PROGRESS . I'm still in the testing and tweaking phase, but the parts should be usable. If you encounter issues, please let me know. This lid riser is for the Creality Ender 5 Max to stop the cables dragging on the…

Order a print of this model

Printables

3U Vented side panel with Multiboard for 10 Inch Rack

Quick remix of the side panel with multiboard to also have vents. Needs to be printed with supports on the bottom of the multiboard for clean print.

Order a print of this model

Printables

TPU seal for Elegoo Centauri Carbon Vented Riser (JesusFreak)

This is a TPU top seal for the 'Elegoo Centauri Carbon Vented Riser' by JesusFreak. Printing notes You will need to print 4 total panel seal pieces and 4 of the corners, like JF's model these are directional, but unlike JF's model, they…

Order a print of this model

Printables

Elegoo Centauri Carbon Vented Riser Lock

Elegoo Centauri Carbon Vented Riser Lock. Fits ECC Vented Riser from JesusFreak I remixed this from Squeemeister This lock holds the vent closed or open. Uses raised wedges on the top of each end to mechanically hold itself in place. Two…

Order a print of this model

Printables

Gigabyte Aorus RTX 5080 Master Vented Covers

These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…

Order a print of this model

Printables

Clean vented cube - ATX PSU plates + more

ATX PSU back plate - 2 PSU positions for air circulation Bottom plate adapted for 120mm fan Rubber TPU Feet + standoffs

Order a print of this model

Printables

flush top parts for sv08 vented riser

I initially printed out the spool holder panel and slider along with the right side corners. Everything fit great, printed panel with ASA and slider with PETG. Made the slight redesign to remove the risk of catching anything on the…

Order a print of this model

Printables

VENTED TOP HAT QIDI X-MAX 3

Taller, stronger, easier to print. Now with bowden passthrough. Print the sides and corners standing up. The pins and louvers can lay flat on the bed. In reality, the pins are just there to help line it up for acetone welding when printed…

Order a print of this model

Printables

QIDI MAX 4 VENTED RISER BY SAC3D

For Non Vented Version Please See, https://www.printables.com/model/1652444-qidi-max-4-non-vented-riser-by-sac3d Vented Riser for Qidi Max 4. Tested in PLA and PETG. Allows the glass to slide as intended. Test printed in both PLA and…

Order a print of this model

Printables

Vented offset funnel

Offset funnel for tight spots like adding oil to engine. Spout diameter is 32.5 mm to 27.5 mm

Order a print of this model

Printables

Elegoo Centauri Carbon Vented Riser LP LOCK

I wanted the vents to hold closed (on Jesus Freaks' original model) during heavy vibration prints so I designed this small lock piece that slots into the vented riser to hold them in the closed position.

Order a print of this model

Printables

Creality Dry Box 2.0 - Desiccant Drying Basket with Vented Lid (Remix, Higher Capacity)

Creality Dry Box 2.0 - Desiccant Drying Basket with Lid (Remix) Thank you, Immodal , for the original model, and for providing a STEP file to make editing easier! I always encourage everyone to provide a STEP file when they share their…

Order a print of this model

Printables

QIDI MAX 4 NON-VENTED RISER BY SAC3D

QIDI MAX 4 NON-VENTED RISER BY SAC3D For Vented Version Please See, https://www.printables.com/model/1604271-qidi-max-4-vented-riser-by-sac3d Non Vented Riser for Qidi Max 4. Tested in PLA and PETG. Allows glass to slide as intended.…

Order a print of this model

Printables

Vented Funco Pop! Base

Created Pop Base with vent holes. Looks great printed in glow in the dark PETG. Sunlu - White (Glows Blue). Slowed the print down. Made for a friend so he can display a Tron figure in his gaming tower.

Order a print of this model

Printables

SOLVED w/ Vented and Hygrometer options! Snapmaker U1 Side Filament Cover + Desiccant System (Airtight Dry Box Upgrade) Simple Build!

UPDATED: The Vented Version is considered the current version and can be used for vented or non vented but it's a little easier to assemble. The reversed thread knob is for for the right side of the non vented files so you probably will…

Order a print of this model

Printables

Flashforge Adventurer 5M Vented Lid

This is a printed lid for the AD5M enclosure kit that includes a mount for a 120mm fan. Idea being to then add a duct and direct exhaust air safely out a window or something when working with ABS or ASA. I printed mine in 0.24mm, with 3…

Order a print of this model

Printables

Qidi Plus4 Vented Lid REMIX

A remix of the awesome lid. I printed it in black ASA GF filament.

Order a print of this model

Printables

ELEGOO Centauri Carbon - Vented Riser Mod#1

Thank you for the wonderful model!

Order a print of this model

Printables

Vented Ripple

Created some vents with a "ripple" on the top to let the RGB light shine through

Order a print of this model

Printables

Vented Enclosure for HeyGears Reflex Resin Printer and Wash Station

This project builds upon Tyler's enclosure system to adapt to resin printing. It is a very large enclosure, 36"x36"x28" to accommodate the upward lifting cover of resin printers. The main purpose is to vent the toxic resin VOC's to the…

Order a print of this model

Printables

Switch 2 Wall Mount with vented holes and cartridge holder

Remix of a remix. I wanted to print a wall mount for my Switch 2. Found a base version, one with ventilation holes, and one with a cartridge holder. To my surprise, there wasn't any that combined both... until now! Recommend to print in…

Order a print of this model

Printables

Centauri Carbon Vented Riser with Filament Feed Slot - Remix has the painted support blockers on the slotted rear riser part (removes the need to manually paint the support blockers on the slotted rear riser part of the model, using this remix .3mf file)

Centauri Carbon Vented Riser with Filament Feed Slot - Remix has the painted support blockers on the slotted rear riser part (removes the need to manually paint the support blockers on the slotted rear riser part of the model, using this…

Order a print of this model

Printables

DeLonghi Magnifica pre-ground coffee funnel cap - vented

Same point as the original, this is remixed from ( DeLonghi espresso machine pre-ground coffee funnel cap by Petclaud - Thingiverse ) . Useful if machine is used in a shared area by people that may mistake the grounds funnel as the bean…

Order a print of this model

Printables

Vented AD5M Riser C with magnetic connector

Vented riser for Flashforge AD5M, modified from this design to not interfere with spool holder. I also added a magnetic connector: press-fit ½" neodymium magnets into the recesses (I bought them at Home Depot). If you don't want to use…

Order a print of this model

Printables

Vented Threaded Funnels for Water or Soda Bottles

These self venting threaded funnels attach positively to most soda and water bottle threads. They are especially useful for filling bottles with liquids that you don't want to spill, such as old motor oil, fuel, etc. The vents insure…

Order a print of this model

Printables

Simple Vented Funnel

Simple funnel. Should be easy to print without supports with .20 mm layer height. Category: Kitchen & Dining

Order a print of this model

Printables

Vented Funnel

Small Vented Funnel If you dont own a 3D Printer I have them for sale on our Etsy https://www.ebay.com/itm/196549856815

Order a print of this model

Printables

Vented Holder with Minimalist Mounting for VR Mouth Tracking Camera

This is a remix of the Arducam B0205 1080P Day & Night Vision USB Camera Case that has been customized for use with virtual reality headsets. For required hardware and specific printing instructions, observe the original posting of this…

Order a print of this model

Printables

Vented Vivarium Lid

This is designed to fit the irregular top on a bell aquarium, as the top was not perfectly round. It has 2mm holes to vent, but negate any life from escaping through the holes at least. As my tanks top is oblong, there is a gap in one…

Order a print of this model

Printables

In-spool dessicant container with hygrometer - stronger weave, vented lid

The original basket weave design by psychprod is ingenious, but being me, as soon as I printed it I knew I would like to tweak a few things, and, again being me, the best way to do so would be to remodel the whole thing from scratch...…

Order a print of this model

Printables

VW Golf 6 GTI vented boost guage pod

Suitable for 52mm boost guage. Right-hand drive

Order a print of this model

Printables

SourceOne V4 & Apex - GoPro Hero 11 Mini Mount - Side Load & Vented

SourceOne V4 & Apex - GoPro Hero 11 Mini Mount - Side Load & Vented Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top originally clam shell style. Check him out at: https://www.youtube.com/c/PokeyFPV Category: Other

Order a print of this model

Printables

AppleTV 4K 1st/2nd Gen 2021 Mount (Vented)

Minor remix of @Founders' nice model (which he remixed from @polmdm's excellent original). Founders intended vertical mounting, but I needed a horizontal mount for under-shelf mounting in an entertainment console. This meant restoring…

Order a print of this model

Printables

Heewing T1 Vented Nose VTX and Camera Mount

I printed mine with it standing on end as you can see in the pics. It printed good for me in this orientation and looks clean. The template is so you can mark and punch holes in the bottom of the fuselage so you can take the VTX in and…

Order a print of this model

Printables

Vented LED bulb shroud

Order a print of this model

Printables

Vented Altmill Stepper Motor Cover

Vented Altmill Stepper Motor Cover to help prevent damage to the motor & cabling.

Order a print of this model

Printables

Mr Funnel vented adaptor

I use the mr funnel for filling my kerosene heater, it's too perfect a fit in the opening though so no air could escape. I made this which is a great friction fit with the funnel and then allows air to escape when filling.

Order a print of this model

Printables

Creality K1 Max top mount spool holder to suit vented riser

The spool roll is slightly shorted as the two uprights are now slightly closer together. Base of uprights modified to sit on top of vented riser. You need to remove the vent sliders and then this clips on top. Sits quite tightly to the…

Order a print of this model

Printables

Lego Compatible (18976.dat) Wheel Rim 11 x 18 with Vented Disc Brake

This model is compatible with the lego system.

Order a print of this model

Printables

Vented Raspberry Pi 3.5 Inch LCD Case

This Raspberry pi case is specifically designed to fit the 3.5 in LCD screen currently available on Amazon for less than $15. CUQI 3.5 Inch Touchscreen for Raspberry Pi There are other similar and will probably work just as well. I added…

Order a print of this model

Printables

1U Rack Spacer, Solid, Multicolor, and Vented Versions

I've provided both full models, and a left and right split sub-model. This split model uses filament scraps as locating pins to glue the sub-models into a single piece. I recommend superglue for the connection. Depending on your printer…

Order a print of this model

Printables

Vented case for Raspberry Pi 5

Hello! Recently i made this case for Raspberry Pi 5 for my friend, hope you enjoy! I recommend using it with screws but it works just by snap fitting it. Printed parts: -x1 Top cover -x1 Main body -x4 Legs (optional) Needed materials: -x2…

Order a print of this model

Printables

DROK L298 Dual H Bridge Motor Controller Vented Case

Newly Updated** I took the well thought out generic l298n Case, provided originally in its original form by Atom's Laband, and rebuilt it from the ground up to support a bigger l268 and amended ports. I have included 1 variations: ( My…

Order a print of this model

Printables

Simple Vented Orchid Pot 75mm

First go at making my own model in fusion 360. Just a simple vented, draining orchid pot. At the time of upload, I am still learning my way around 3d printing. Follow best practice.

Order a print of this model

Printables

Reinvented keyring

Reliable keyring for attaching your keys to your belt, backpack or anything else. Inserting the key requires only two moves, followed by a snap. The keys are safe and will not fall out. To unlock, twist the parts at the side diagonal…

Order a print of this model

Printables

Vented funnel for windshield fluid

This is my updated version of the windshiel fluid funnel, modified for those who are dealing with a tighter fit.

Order a print of this model

Printables

Vented Funnel - Remix

This is a remix of muzz64's 'Vented Funnel' - https://www.thingiverse.com/thing:1394000 I wanted a slightly larger version, so I CADD'd my own from scratch. Large opening = 75mm Small opening = 14mm Total height approx. 102mm Walls are…

Order a print of this model

Printables

Lenovo Tiny M720q Top Vented Cover

The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…

Order a print of this model

Printables

Qidi X-Max 3 Vented Lid Riser

Support material required due to the locking dovetail interface, also recommended in the vent slots but may not be necessary. Print 1 each of the risers and slot them together. Print with the risers laid on the build plate standing up as…

Order a print of this model

Printables

Qidi Plus 4 Vented Riser

- 40in² vented space - No hardware Necessary - Just under 850g of filament for all pieces (2 walls 15% cubic subdivision infill) - Super Glue optional - 10 pieces in total - Spool Riser with cap included - Minimal supports needed - No…

Order a print of this model

Printables

ESRack - Module - Vented Blank

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Order a print of this model

Printables

AR Wing Pro vented wing skids

Wing skids for your AR Wing Pro with ventilation. open space created to reduce weight, but still offer space for a RX or other item. Skids align with travel of the aircraft. Use support. Model includes Left and Right. Press fit only, no…

Order a print of this model

Printables

Elegoo Centauri Carbon Vented Riser

Order a print of this model

Printables

John Deere 110TLB vented front axle cap

Order a print of this model

Printables

Flashforge AD5M Vented Hotend Top

My extruder board was overheating, so I made a vented cover to allow it to breathe better.

Order a print of this model

Printables

Qidi Q1 Pro toolhead vented mod

Based on the original Qidi model, saves about 20g uses 5 mm magnets (check fitting depth, you may require 1 or 2 per side, or just edit the model to fit original 4mm magnets) NOTE - your build area will be reduced by 8mm, so you have to…

Order a print of this model

Printables

Prusa XL EnXLosure - Filtered Vented Back Pannel

A while back I modified the enclosure, I have for my XL to have 80mm fans attached so I can keep the doors closed and not get too hot. I decided to add a filter box which I filled with activated carbon to get rid of any VOC some materials…

Order a print of this model

Printables

Vented Face plate for HP Reverb VR Goggles

My HP Reverb gets warm on my face. I usually need a fan blowing on my face to keep cool while I use VR. This face plate has heat vents. You can install heat sinks on the hot chips to passively vent thru the slots. I have read that similar…

Order a print of this model

Printables

Tactical Funnel, Vented Wide Mouth, 15 cm

Tactical Funnel, Vented Wide Mouth, 15 cm No supports needed Please LIKE if you download

Order a print of this model

Printables

Qidi Plus-4 Glass Top Vented Corner Risers (short gap)

I finally upgraded to this Qidi Plus 4 printer. The glass top is great, but for low temp prints (PLA, etc), where do you put it? ALSO, my printer is in my garage which gets dusty. So I want the top in place just to reduce dust settling…

Order a print of this model

Printables

Vented funnel for Listerine

Hi all, here is a simple funnel I made for filling travel-sized (95 mL) Listerine bottles from the full-sized (1 L) ones. Thought I'd share it in case anyone was looking to do the same. I'm sure it could be used for other purposes by…

Order a print of this model

Printables

Down Draft Vented Jess-Em Router Table Inserts

I already designed the non-vented JessEm Compatible Ring Inserts for Router Lifts so I was asked to make them vented so people could use them with their downdraft router table. So I did. They should be completely compatible, just as the…

Order a print of this model

Printables

K1 Max vented riser

This is a vented riser for the K1 Max, slim and fairly minimal, it has the benefit of being able to adjust the vents from the top without reaching around the back of the printer. It consists of 4 corner pieces that fit together, with a…

Order a print of this model

Printables

Mac Mini M4 10" Rack - Vented

A rack shelf for a Mac Mini M4 (2024) in a 10" rack. Includes air vents below the computer and optionally a keystone jack on both sides so rear ports can be routed to the front of the rack.

Order a print of this model

Printables

Prusa XL dwarf cover door vented

As I'm building my very first Prusa XL printer from the partially assembled kit and planning to print lot's of ABS and engineering materials I will be probably running the temperature in the enclosure that little bit hotter I'm not sure…

Order a print of this model

Printables

Vented Funnel

Order a print of this model

Printables

Vented Funnels

A variety of vented funnels. Easy to modify in any splicer and STEP file included for import into CAD software. The 35mm version should fit into the Sunlu 1kg resin bottles for easier filtering and cleanup post print.

Order a print of this model

Printables

Cat Lover's Vented Funnel

I printed the insert in TPU though I am sure PLA is just as fine.

Order a print of this model

Printables

Bandsaw Table Insert Plate 70mm (Vented - Holes) (fits JET JWBS-14SFX)

Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…

Order a print of this model

Printables

Bandsaw Table Insert Plate 70mm (Vented - Slots) (fits JET JWBS-14SFX)

Order a print of this model

Printables

Bandsaw Table Insert Plate 70mm (Vented - Round Slots) (fits JET JWBS-14SFX)

Order a print of this model

Printables

19" 1U Vented Server Rack Cover Plate

I printed a few different server blanks and B3D's were my favorite. I just wanted a slotted vent design to try to keep with ubiquity's design style. I made the wide style first, but decided it wasn't exactly what I liked, then made the…

Order a print of this model

Printables

Vented Power Supply Cover (Parametric)

I needed a cover for an LED power supply to prevent my very inquisitive 3 year old son from being electrocuted. Couldn't find exactly what I was looking for so designed my own (my first design). Fully parametric with as many options as I…

Order a print of this model

Printables

Prusa XL Buddy Board Vented Cover

The OEM Electronics Bay Cover is not vented resulting in the MCU temperature rising to >80°C. The motherboard also reads >90°. Prusa does not list maximum temperatures for these components, but such high temperatures cannot be conducive…

Order a print of this model

Printables

Vented case for Raspberry Pi 4 and Pi camera

Printed in Prusament PLA. If you want a tighter fit for the camera holder dowel pin, wrapping with a few layers of scotch tape works well. edit 05/02/2025 - updated lid and case to fix position of camera ribbon slot, add cut-out for…

Order a print of this model

Printables

Qidi Plus 4 vented riser with shelf

Remixed of LuckyBananas riser I was already using the tetto riser but needed a shelf for my S4 dryer and liked LuckyBananas but didn't want to loose the height or venting which I was used to I printed in petg using generic petg settings…

Order a print of this model

Printables

CNC Aluminium Stealthburner Vented Cable Cover with VORON Logo

This Stealthburner Vented Cable Cover has been narrowed to fit cleanly with the metal CNC Aluminium Stealthburner assemblies. The vents are quite large and the edges have been slightly thickened. I printed this with 100% infill, 3 or 4…

Order a print of this model

Printables

Vented Ceiling Light Shade

My sealed light fixtures with Glass shades/diffusers were cooking my LED light bulbs, severely shortening their lifespan. I designed this one to be closed enough to shade/diffuse the light, but open enough to allow free airflow, keeping…

Order a print of this model

Printables

Internally Vented Funnel With Spill Resistant Recurved Lip

This is a fairly standard sized funnel with two internal vents and a recirved lip to help prevent spills if the funnel is tilted.

Order a print of this model

Printables

2oz spray bottle + bed scrubber vented tray.

Keep your PEI sheet cleaning supplies together with this easy print. Get the microfiber scrubber https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder Print with supports on the bottom for gripper dots. Happy…

Order a print of this model

Printables

Vented Box for 5v power supply

I bought these cute little 5v power supplies and wanted a cover for them. I design it in OpenSCAD. Print instructions I used Prusa PLA, print settings .20 mm SPEED MK3, no supports, fill density 20%.…

Order a print of this model

Printables

#0215 Vented Fast Funnel for 5-Gallon Jug

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* A vented funnel optimized for FAST pouring into a 5…

Order a print of this model

Printables

Ubiquiti unifi OCD uacc 2U vented panel with fans

Added some fans to a ubiquiti ocd panel. made three versions. with own material like 8mm m4 hexbolts and m4 x5x6 heated inserts and m3 6mm hexscrews for mounting the adapter to the OCD panel with own material as in point 1 but with an…

Order a print of this model

Printables

Kmart Glass Container Vented Lid Snap Closure Clip

Just the small vent clip/ lid closure piece for kmart glass containers. Probably fits more containers out there too. Definitely not microwave or even food safe with pla but it'll at least seal the contents Specifically made it for these…

Order a print of this model

Printables

Hobie 16 Vented Drain Plug

Hobie recommends storing the Hobie 16 with drain plugs removed to ventilate the hulls. Unfortunately, I learned that field mice can fit through the drain holes (and will happily chew up the buoyancy foam inside). This drain plug has a…

Order a print of this model

Printables

Mlok rail cover (vented)

M-LOK rail covers I used PC blend for these and it worked great. The covers fit very snug so you may need to scale them down a tiny bit, depending on your printers calibration.

Order a print of this model

Printables

LM2596 enclosure, vented with 20mm fan, for buck converter

Order a print of this model

Printables

Centauri Carbon Vented 7.5 mm Side Panel Spacer - Beta Testing

The idea behind this is to minimize the vertical space used by the printer. That means no risers. But, what if venting is desired without removing the top? This is an answer to that. Testing shows that it is difficult to design a…

Order a print of this model

Printables

Fruit Fly Trap Mason Jar Lid - Vented Remix

Remixed fruit fly trap lid for mason jar. Added 102% scaled version that fits less tight. Printing is yellow, white, red or green are suppose to attract fruit flies more.

Order a print of this model

Printables

1.55" RC Wheel Beadlock with 5mm Hex - 3 Designs - Vented and Non Vented

I picked up these 1.55" wheels and tires from Amazon for 5 Euro and fell in love with look, but I wanted beadlock wheels instead of gluing the tires. I searched around and couldn't find any 1.55" wheels with a 5mm hex so I decided to take…

Order a print of this model

Printables

Elegoo Centauri Carbon 10 mm Vented Panel Spacer

Use this spacer to keep your Centauri Carbon interior cooler, mount panel hinges, mount an interior spool holder, or all of the above. You will minimally need 8x 12mm M3 machine screws. Knurled heat-set inserts (M3-4x4mm) are the easiest…