Vented Riser with integrated LED Slot for Elegoo Centauri Carbon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The most popular Vented Riser for Centauri Carbon by JesusFreak - now with integrated Slot for a LED strip. NO GLUE!
- Rating
- 5 / 5
- Likes
- 65
- Downloads
- 640
- Makes
- 2
- Views
- 2,770
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Bring light into your prints! ✨
The Elegoo Centauri Carbon is a fantastic machine – but let’s be honest, it’s pretty dark inside. Inspired by the amazing original design from JesusFreak (huge thanks for the great model! 🙌), I created this remix with one big upgrade:
👉 A dedicated slot for standard 8mm LED strips – no glue required.
Why is this important?
Most LED solutions rely on adhesive tape, which is far from ideal in a heated chamber. When printing high-temp materials like ASA or ABS, the glue often softens and eventually peels off. With this integrated slot, your lighting stays secure no matter what you’re printing.
🔹 Key Features
- Fits standard 8mm LED strips (STEP files included for easy customization).
- No adhesives needed – perfect for high-temperature printing environments.
- All the great functionality of the original vented riser remains intact.
- Finally, a well-lit build chamber so you can actually see your prints in action.
🔹 Parts & Assembly
- I used this LED strip: https://amzn.to/45Tx0AZ
- This cables: https://amzn.to/45PyOuG
- And this connector: https://amzn.to/4lJ0OGn
- And also this connector to conveniently plug in and out the LEDs: https://amzn.to/464Ft5w
On the mainboard under the machine you'll find an unused slot dedicated to a separate light source. Originally it's an Molex connector, but this one is hard to get. So if you use the JST and cut of a little bit from the sides, it will fit perfectly. It's important that the led strip runs on 24V!
🔹 Printing Notes
- Supports required – I’ve added manual supports to keep them minimal and easy to remove.
- The cornes are still the same and untouched. You need all four of them, because they are not totally equal.
- A pre-supported 3MF file is included for convenience.
- I printed the Polymakers HT-PLA, because of its heat resistance up to 150°C. Ideal for printing ASA or ABS with high chamber temperatures.
🔹 Customization
Want to use a different strip size? No problem – just tweak the included STEP files to fit your needs.