Vented Riser with integrated LED Slot for Elegoo Centauri Carbon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The most popular Vented Riser for Centauri Carbon by JesusFreak - now with integrated Slot for a LED strip. NO GLUE!
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 640
- Wydruki
- 2
- Wyświetlenia
- 2766
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Bring light into your prints! ✨
The Elegoo Centauri Carbon is a fantastic machine – but let’s be honest, it’s pretty dark inside. Inspired by the amazing original design from JesusFreak (huge thanks for the great model! 🙌), I created this remix with one big upgrade:
👉 A dedicated slot for standard 8mm LED strips – no glue required.
Why is this important?
Most LED solutions rely on adhesive tape, which is far from ideal in a heated chamber. When printing high-temp materials like ASA or ABS, the glue often softens and eventually peels off. With this integrated slot, your lighting stays secure no matter what you’re printing.
🔹 Key Features
- Fits standard 8mm LED strips (STEP files included for easy customization).
- No adhesives needed – perfect for high-temperature printing environments.
- All the great functionality of the original vented riser remains intact.
- Finally, a well-lit build chamber so you can actually see your prints in action.
🔹 Parts & Assembly
- I used this LED strip: https://amzn.to/45Tx0AZ
- This cables: https://amzn.to/45PyOuG
- And this connector: https://amzn.to/4lJ0OGn
- And also this connector to conveniently plug in and out the LEDs: https://amzn.to/464Ft5w
On the mainboard under the machine you'll find an unused slot dedicated to a separate light source. Originally it's an Molex connector, but this one is hard to get. So if you use the JST and cut of a little bit from the sides, it will fit perfectly. It's important that the led strip runs on 24V!
🔹 Printing Notes
- Supports required – I’ve added manual supports to keep them minimal and easy to remove.
- The cornes are still the same and untouched. You need all four of them, because they are not totally equal.
- A pre-supported 3MF file is included for convenience.
- I printed the Polymakers HT-PLA, because of its heat resistance up to 150°C. Ideal for printing ASA or ABS with high chamber temperatures.
🔹 Customization
Want to use a different strip size? No problem – just tweak the included STEP files to fit your needs.