QIDI MAX 4 VENTED RISER BY SAC3D
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vented Riser for Qidi Max 4. Tested in PLA and PETG. Allows glass to slide as intended. Optional slot for USB clearance.
- Rating
- 4.875 / 5
- Likes
- 48
- Downloads
- 535
- Makes
- 7
- Views
- 1,736
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For Non Vented Version Please See, https://www.printables.com/model/1652444-qidi-max-4-non-vented-riser-by-sac3d
Vented Riser for Qidi Max 4. Tested in PLA and PETG. Allows the glass to slide as intended. Test printed in both PLA and PETG. Printed 0.2mm layers, 15% infill, no supports. i did print with a brim on the sides to help prevent warping, this may not be needed. 2 versions, one clean with no extra cut out for the USB and one other that has a cutout for a USB stick to clear. please let me know if the tab fitment between parts it too tight of too loose. Fitment tested in both PLA and PETG so should be good to go.