1 / 7
Cat Planter with Vented Liner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6" diameter cat planter with removable vented liner for drainage
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 125
- Makes
- 0
- Views
- 619
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
6" diameter cat planter with vented liner. The liner comes out and is printed separately. There are holes in the side of the liner and spaces at the top between the liner and the pot to let air in.
Neither need any support or adhesion. The liner overhang should be small enough to print with no (or minimal) fraying.
Photos: Hatchbox Granite II PLA, Overture black PLA, both run at 200/62 on a stock Ender 3 V2. The pot was run at 10% infill.