Vented Threaded Funnels for Water or Soda Bottles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These self-venting screw-on funnels fit most Soda or Water bottles. Various diameters are provided.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 106
- Makes
- 1
- Views
- 411
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
These self venting threaded funnels attach positively to most soda and water bottle threads. They are especially useful for filling bottles with liquids that you don't want to spill, such as old motor oil, fuel, etc. The vents insure smooth and rapid flow.
If they are to be used for consumable liquids then take appropriate precautions with the printing and/or coating processes to make them food safe.
Various sizes are provided as indicated by max diameter of the funnel. They have been tested in PLA and PETG but other filaments should also be fine. Orient them with rim down with no supports for printing (as provided). The rim is designed for good adhesion. The seam position can be set to random or aligned depending on your preference.
If the threads are too loose or tight adjust the XY (but not Z) scaling in 1-2% increments to get proper fit. Printed on MK3, MK4 and XL.