Swisson XMT500 Airtag Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Airtag holder designed to fit in your Swisson XMT-500
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
I Designed a Holder to Fit an Airtag in your XMT-500 DMX Tester. So you can Track your Tester. This is especially nice if you are like me and tend to lay it somwhere during Troubleshooting :)
It is simply screwed on the Expansion Slot of your XMT. Not sure if this will collide with the Expansionboard in the Feauture. Maybe i will post an Update then.
The other Side is held together via an M3 Screw and a Heatset Insert.
Take Care, that the M3x8 Screw is Flush in the heatset and doesnt Scratch on the PCB!
Used Hardware: m2.5x8 SHCS, M3x8 BCHS and e M3 Heatset Insert.
Disclaimer: You have to open up your XMT-500 for this Mod! You can loose your Warranty doing this. Neither me or Swisson are responsible for any Issues or Damage on your XMT using this Mod!