Swisson XMT500 Airtag Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Airtag holder designed to fit in your Swisson XMT-500
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
I Designed a Holder to Fit an Airtag in your XMT-500 DMX Tester. So you can Track your Tester. This is especially nice if you are like me and tend to lay it somwhere during Troubleshooting :)
It is simply screwed on the Expansion Slot of your XMT. Not sure if this will collide with the Expansionboard in the Feauture. Maybe i will post an Update then.
The other Side is held together via an M3 Screw and a Heatset Insert.
Take Care, that the M3x8 Screw is Flush in the heatset and doesnt Scratch on the PCB!
Used Hardware: m2.5x8 SHCS, M3x8 BCHS and e M3 Heatset Insert.
Disclaimer: You have to open up your XMT-500 for this Mod! You can loose your Warranty doing this. Neither me or Swisson are responsible for any Issues or Damage on your XMT using this Mod!