Bonnet buffer to carry the hood of a Dacia Duster from 2011.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bonnet buffer of a Dacia Duster from 2011. The original rubber that sits on top as a buffer needs to be re-used.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v2.0
Background
So my Dacia Duster from 2011 started rambling when driving. Turned out that the rubbers in the assembly supporting the bonnet (or hood) where a bit squashed. New ones where expensive so I challenged myself to model and produce replacements.
By increasing the height of the body of the assembly and re-using the rubbers the problem was fixed. No more rambling for about a year, at least until this BLACK car was sold. You should have seen the expression on the face of the salesman when I pointed out 4 beautiful ORANGE objects carrying the hood. Anyways, I do not have pictures of the pimped car but fortunately I did produce a spare.
As you can imagine the required support is more than standard e.g. 50% as there is quite some load to carry. Printed in PETG to withstand the occasional tropical temperatures in The Netherlands.
Some details
- The assembly is divided in parts for minimal or no support at all.
- The print direction is important because of the miscellaneous forces.
- The top and bottom halves of the body are carrying the weight of the bonnet.
- So for printing it is best to place the models on their top or bottom side.
- The clips however need to flex inwards and outwards when inserting and fixing the assembly in the body of the car.
- Therefor all three clips need to be printed perpendicular to the flex direction *1).
- The provided gcode file has all parts arranged properly so no worries.
*1): You will be corrected if you forget about this detail. The clips will snap off immediately at your first attempt of inserting the assembly …