Liczymy pasujące modele…
Toyota MR2 bonnet badge for First Generation/MK1: W10 (1984–1989). Not for use on vehicle. For display only. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating…
This is rambros ' excellent EMD F7 model for Dragon Railway , remixed with the iconic AT&SF “Warbonnet” livery to print on a Bambu AMS, or other multicolor printer. This contains the remixed files for the Warbonnet livery for both A and B…
I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…
I wondered what a "snow woman" would look like and what "snow people" looked like and my google searches revealed that a snow woman just had a smaller hat! So I took the original into TinkerCAD and made it shorter and a bit wider and it…
I printed this in ABS with 6 perimeters. No supports. Works great. Updated to make a little stiffer & stronger.
Print Solid, I used ABS. I have been using on my Hilux for 7+ years, has not broken yet. Although the clipping tongs look small, they hold the arm in place no worries. Photo's taken after 2 years of use. Category: Parts
This clip is a spare part for the Suzuki Swift. The original clip was a little bit loose and someday it fell down into the motor area. This happend a few times before, but this time I couldn't find it anymore :-( I designed it with…
Honda jazz/fit bonnet stay clip - 2016 model Grey version is abs after 5 years use. Printed in abs/petg
Bonnet prop rod clip for Opel Vectra A / Vauxhall Cavalier mk3. Should fit many more GM cars from that era. Made for 8mm rod. I designed this after accidentally breaking mine. Printed in the designed orientation but with supports at…
This is a replacement part for the original white part in the locking mechanism (see picture). This part is known to break easily, making it impossible to open the bonnet of the car. Dealers can only buy the replacement in a kit to…
I didn't want to pay £6 for a cheep clip that someone else broke on my car. so I spent many hours designing and printing this clip to replace it. Many Hondas use this type of clip with part no.: 90672S5A003. My car is a 2007 accord.…
Bonnet Stay Clip Arm Rod Prop For Vauxhall Opel Combo Corsa C Meriva A Tigra
I made this latch to replace the broken original one from my 1999 Honda CRV. It was made to be glued over the remaining plastic on the cable from the original latch. It fits with a small interference above it. The latch is to be pushed…
I bought some chunky lettering for the bonnet of my Discovery 1 and soon found that they were all for a flat panel, not the curved profile of my car. Here's my alternative set of letters that have a curved front and back. Printing Rotate…
A different bonnet for the Landy Mini, pimp your landy. Print at whatever works best for you.
Printed in Sunlu PLA+ at 50% infill
Opel corsa c bonnet stay clip. Printed in abs. 20% infill. Print with supports. 37 minute print. To edit the step file. Edit the step file in solid edge. Open as an iso metric part. Go to options - units - length and click the drop down…
PETG Layer 0.2 Fill 100%
UPDATE: I made a version 2 of this design with a pivoting front axle, and a few other changes. It's a lot more fun to play with. :D ----- I needed a covered wagon for an object lesson, and didn't want to decorate a shoebox, as one source…
Deux emporte-pièces en forme de bonnet de Noël avec une étoile en option. Le gcode fourni permet d'imprimer la version sans étoile à l'échelle 75%. Happy printing !
This is a bonnet release lever spare for a VW Passat. My car is a 2003 VW Passat (1.9 TDI 4 motion). It will fit many other models, but I am unsure about more modern models.
I created a simple clip to attach a spare wheel to the bonnet of the landy like the military vehicles and the ones who participated in the legendary Camel Trophy. in order to make it work you have to drill a 6,5 mm hole in the bonnet (see…
A bit tough to print, but using a brim keeps the legs all in place.
Direct replacement for Ford part W709046S300 The installation could turn out to be on the more difficult side, so just ram it in there or deburr the car's side - in my case the plastic part this goes into wasn't manufactured with the…
Print in TPU or some PP, i printed these in generic black TPU . Funny enough as its not a complicated form i tried printing the TPU i have with 0.2mm layer and 0.4mm nozzle on my Ender 3V3 XZ with a printing profile for PETG, and i can…
Simply cut (or melt) down the remaning part of the original button and glue this back with epoxy.
1U0 823 397 121 supported vehicles: SKODA OCTAVIA I Facelift, OCTAVIA III FABIA 3 , 4 KAMIQ SCALA print settings material: PETG infill: 20% supports : YES
All–In-One Retro Game Controller & Console The Adafruit Joy Bonnet is a tiny add-on for the Raspberry Pi W that features a 2-axis joystick and 8 buttons. It's great for making retropie projects. In this tutorial, we'll learn how to use…
Bonnet side protection To glue with MAMUT GLUE High Tack
For Assembly, watch this video:
Renault Zoe has four bonnet bumpers (looking from front of the car) - two at the front (part no: 628405505R), two more back and outside (part no: 628408501R): We can say that the bumpers consist of two elements connected together via…
A bit of fun for the kids, but thought I would share it anyways. It was one of those kids moments where you get “Dad, can you make me this”
Case for Adafruit 128x64 OLED Bonnet for Raspberry Pi on Pi Zero. There are versions that use 2.5mm threaded inserts and with modelled threads. In addition there are models that can attach 12mm x 2mm or smaller magnets so the case can be…
3d model of cast-on bonnet for sock knitting machine. 36 holes for 72 needles cylinder. Hooks go press fit on plate, use something plastic to tap it in place (handle of screwdriver or something). 8mm hole in middle for attaching weight.…
Printed with 0.3mm quality. Support structure is needed. Speed 100mm/s. The model does work and fits perfectly. Remix of a design on thingeverse by LilHansel. I used a 6mm bolt to fit it to the latch in the car. It has been working…
BOM: Radxa 3W, with soldered header OpenIPC Bonnet 4 x IPEX to SMA or RPSMA, 2x 5cm and 2x 10cm 5.5 x 2.1mm power barrell jack plug and socket 30mm x 10mm 5V fan Micro HDMI to HDMI cable USBC female socket
Land Rover Defender bonnet support rod clip
This is the emergency opening handle for Renault Laguna III. If the cable between the handle and the bonnet lock has become longer, you will not be able to open the bonnet with the factory handle. Remove the original handle by pulling it…
Valmet tractor bonnet logo. These have been used in Valmet tractors from the 1970s.
Land Rover Defender - bonnet hinge bush 346849
A printer friendly version of pimaster's 2004 Subaru Forester Bonnet Stay Clip Category: Automotive
Bonnet stay housing. Alternative location for inserting the bonnet stay when in a restricted height zone - underground parking with pipes etc in the way. Printed in Tpu95a with supports. 20% infill. 43 minute print.
Designed for my B3 modell, im not sure if it fits the B2/B4 modell or even some other Cars. Feel free to tell me if it fits for something else than Audi 80 B3. PLA and any other hard material would not work for this part! Its designed to…
💙 What Is a Bluebonnet? Species name: Lupinus texensis (most iconic species) Family: Fabaceae (legume family) Origin: Native to Texas and parts of northern Mexico. Type: Annual wildflower — celebrated for its seasonal fields of vivid…
Tarp protector thingie for Warbonnet Ridgerunner hammock spreader poles. Parts ending WB or RL are for Warbonnet original or Ruta Locura carbon poles. This is a two part design and can be attached to hammock permanently. Intention is…
Print at 0.16mm quality with 100% infill and support preferable ABS
A 7mm spacer for the bonnet latch when installing a re amemiya bonnet / hood on a Mazda RX-8 Because the hood will be out of line without this spacer i designed it for a friend. Printed best be in ABS or PETG
Based on Wojciech's design
version of the bonnet for ProfessorBoots rc tractor without "BOOTS" written on the side
Handle to open front bonnet/mask/hood from inside
Bonnet for Cramer truggys. Modified lower bumper from the original: https://dukedoks.com/portfolio/guia-cramer/
A little plastic clip to replace the original metal bonnet stay clip on a Mini (Part Nr. CZH209) if it breaks like mine did. To install, insert the bottom bit in the slit in the bonnet and then rotate the part 90° to the right to lock it…
This twist-in clip will hold the bonnet stay (the long metal pole) in position when the bonnet is to be closed. It pushes into a square hole measuring 8.5mm x 8.5mm and twists about 50 degrees to lock in place and align with the bonnet…
Motorhaubenstütze Clip - Bonnet Support Clip
I was replacing the Delta faucet cartridge for our single handle kitchen sink and the instructions specified a 1-5/16 six point socket. I tried to buy one at Lowes and Home Depot stores locally, but they did not have that size. I then…
This is a case for a raspberry pi zero w with an Adafruit 2.13 inch e ink display. All friction fit. Supports recommended for the case body.
Cerf avec un bonnet de Noël
Bonnet support holder GAZ Gazelle 2705 3302 Original: 4301-8418126 Applicability: GAZ Gazelle 2705 3302
Print flat on the bed in PLA or any other material. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.15 Filament: Any PLA Any Category: Signs & Logos
Chat avec un bonnet de Noël
Hiboux portant un bonnet de Noël
A case for Adafruit's Animated Eyes Bonnet for Raspberry Pi. The case will mount either a Pi Zero or a full sized Raspberry Pi on the front inside face or inside bottom of the case. The HC-SRO4 mounts through the front of the case. The…
Background So my Dacia Duster from 2011 started rambling when driving. Turned out that the rubbers in the assembly supporting the bonnet (or hood) where a bit squashed. New ones where expensive so I challenged myself to model and produce…
I made it for Skoda citigo 2014, but other brand models can use it too. 100% infill, PETG There is two version of it: split version: faster print, additional strength, you can join them, with CA glue and bolt them together with 2 x…
Orient it on it's flat face
For attaching the soundproofing mat in the hood. I printed this with PETG-CF. The mat appears to be securely attached. But I'm unsure whether the part will retain its shape under the harsh conditions in the engine compartment. Update…
OK, This is the last and final version of the case. We were playing with the HC-501 and getting betters results than with the HC-SR04 or the US-100. So a new version of the case was necessary. The HC-501 press fits into the case. If you…
Bonnet vents to suit G3 Impreza, designed is intended to remove heat from the engine bay to assit with air flow through radiator. Best printed in a high temp material such as ASA or similar and use VHB tape to install. The instructions…
Remixed the top part of Esquilos nice Raspberry Pi housing https://www.thingiverse.com/thing:1637227 (thanks a lot for this cool thing!) in order to fit a Adafruit Radio Bonnet connected to a Raspberry Pi. Please use the bottom part from…
This suits least Audi 80/90. Fixing for hood rod lever. Push pin to secure it in place.
This lever is designed to mount to the pull cord for the hood/bonnet release in Corsa E and similar models. I printed in PETG with 100% wall thickness and a brim for adhesion. For strength purposes I'd print as hot as possible, especially…
*The Bonnet strut rod clip thingy on my Magna broke, so I designed a new clip based on the old one. Just like the old one, the method to remove and replace the clip is to twist at a 45° Angle to remove, and install the new one at the same…
As the short-stroke key (DIP push button) broke the plastic knob (injection molded) also broke off. So I took the cover and operating panel off. I saw that the push button was broke. So I tinkered a repair. After three hours wife could…
This is a 3D printed upgraded replacement part for TATA Tiago Bonnet/Hood rod yellow plastic part which eventually breaks. Only the yellow part is not available and instead the complete rod needs to be replaced if you want the yellow part…
Another case for the Radxa and OpenIPC Bonnet. Fits a 10mm 20x20 fan. If you use the same DC barrel connector you need to cut away a piece of the rubber so that the antenna pig tail fits in the hole.
To open the bonnet (hood) of a Mercedes-Benz Vito W639 or W638 when the release cable is broken or stuck, you need to remove the front grille using a Torx T25 bit. The grille is secured by three screws positioned at a 45-degree angle,…
This part is intended to be used as replacement on the ActionBikes brand, Willis Jeep. This handle is much more ergonomic than the original one. You are going to find the .step for download too if you want to modify this part Printing:…
Basic Print settings should work fine. Print Settings Printer: BIBO Rafts: No Supports: No Resolution: 150 um Infill: 100% Filament: Inland PLA Doesn't matter. Notes: Basic Print settings should work. How I Designed This DesignSpark…
Designed to help extend the bonnet strut on an MG Midget to prop the bonnet open wider.
Same hooks as used in the referenced, just made additional sizes based on original model dimensions
After replacing the pressure regulator because of a stem leak, I observed that the new regulator has a composite bonnet instead of brass. It's important for the bonnet to have UV protection from the sun. The pressure regulator housing…
Material: Pla, Petg recommneded Support: NO Infill: 15% Walls: 8
A minimalistic case with mounting options for a RPI
This is a plant tag for the Pepper of variety Scotch Bonnet in the font Billionaire Dreams
This is the gasket that goes inside the plastic nut. The 630-7755 repair cut doesn't come with this important piece. I used TPU 95A hardness.
Attempting to make replacement parts for bonnet rubber mounts. For a Corsair V4. Three different versions of the design. Settings, Layer Height 0.2, Infill 50%. Pattern, honeycomb. Filament overture tpu NOZZLE TEMP 210 - 230 °C BED TEMP…
I liked my older car that had gas cylinders to raise the engine-bay hood. The USA market Lexus UX has a rod you manually put in place instead. I purchased a ~$30 kit on Aliexpress similar to this one on Amazon which worked OK, except…
Hey guys, i made a simple case for the Raspberry Pi Zero WH with an Adafruit Audio bonnet both for using the cinch or the 3.5mm audio jack (German: Klinke). The Cover sticks with a force type connection which can vary with printer and…
The StreetScooter bonnet is held in by screws that screw into heat-set inserts. Those heat-set inserts easily cross-thread and strip the knurling. If that happens, they are hard to unscrew and need to be replaced. Instead of heat-set…
Material: 7 g TPU85A Druckereinstellung: Layerhöhe 0,2 / Infill 40 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Zusätzliches Material / additional material: Wurmschraube / worm screw DIN914 M5 x 20 mm Gutes Gelingen und…
Designed for my B3 modell, im not sure if it fits the B2/B4 modell or even some other Cars. Feel free to tell me if it fits for something else than Audi 80 B3. PLA and any other hard material would not work for this part! Its designed to…
I liked my older car that had gas cylinders to raise the engine-bay hood. The USA market Lexus UX has a rod you manually put in place instead. I purchased a ~$30 kit on Aliexpress similar to this one on Amazon which worked OK, except…
UPDATE: I made a version 2 of this design with a pivoting front axle, and a few other changes. It's a lot more fun to play with. :D ----- I needed a covered wagon for an object lesson, and didn't want to decorate a shoebox, as one source…
This part is intended to be used as replacement on the ActionBikes brand, Willis Jeep. This handle is much more ergonomic than the original one. You are going to find the .step for download too if you want to modify this part Printing:…
Designed to help extend the bonnet strut on an MG Midget to prop the bonnet open wider.
Same hooks as used in the referenced, just made additional sizes based on original model dimensions
This suits least Audi 80/90. Fixing for hood rod lever. Push pin to secure it in place.
💙 What Is a Bluebonnet? Species name: Lupinus texensis (most iconic species) Family: Fabaceae (legume family) Origin: Native to Texas and parts of northern Mexico. Type: Annual wildflower — celebrated for its seasonal fields of vivid…
The StreetScooter bonnet is held in by screws that screw into heat-set inserts. Those heat-set inserts easily cross-thread and strip the knurling. If that happens, they are hard to unscrew and need to be replaced. Instead of heat-set…
