Helical Focuser for Nikon 300mm F4 Lens - For Astrophotography
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Automatic focuser used for Astrophotography.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Public Domain
Prints
The lens support and focuser support are parametric designs in Fusion 360. The CAD files are included to enable modifications or remixes. I printed at 30-40% infill with 4 perimeters from PETG. Two of these parts use brass heat inserts to enable assembly.
Pulley: Important: match pulley teeth spacing to belt.
uxcell Aluminum 15 Teeth 5mm Bore 5.08mm Pitch Timing Belt Pulley for 10mm Belt
https://www.amazon.com/dp/B0747MW3X1?ref=ppx_yo2ov_dt_b_fed_asin_title
Belt:
140XL 037 Timing Belt 3/8" Width 70 Teeth Black Cogged Rubber Geared Drive Belt (140XL037)
https://www.amazon.com/dp/B082GGNCH9?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Losmandy Plate:
Angeleyes Losmandy Guide Mirror Dovetail Plate, 30 cm, Aliexpress.
Ioptron Electronic Automatic Focuser:
https://www.ioptron.com/product-p/8453.htm
Inserts/Nute/Bolts
M5 and M4 Heat Inserts, Nuts, Bolts
Testing
The iMate / EKOS auto focuser worked very well. It’s a bit different with a lens as the in-focus position is near to the end of the focuser range. I reversed direction and set the initial move to 5 which worked well.