Helical Focuser for Nikon 300mm F4 Lens - For Astrophotography
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Automatic focuser used for Astrophotography.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Public Domain
Prints
The lens support and focuser support are parametric designs in Fusion 360. The CAD files are included to enable modifications or remixes. I printed at 30-40% infill with 4 perimeters from PETG. Two of these parts use brass heat inserts to enable assembly.
Pulley: Important: match pulley teeth spacing to belt.
uxcell Aluminum 15 Teeth 5mm Bore 5.08mm Pitch Timing Belt Pulley for 10mm Belt
https://www.amazon.com/dp/B0747MW3X1?ref=ppx_yo2ov_dt_b_fed_asin_title
Belt:
140XL 037 Timing Belt 3/8" Width 70 Teeth Black Cogged Rubber Geared Drive Belt (140XL037)
https://www.amazon.com/dp/B082GGNCH9?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Losmandy Plate:
Angeleyes Losmandy Guide Mirror Dovetail Plate, 30 cm, Aliexpress.
Ioptron Electronic Automatic Focuser:
https://www.ioptron.com/product-p/8453.htm
Inserts/Nute/Bolts
M5 and M4 Heat Inserts, Nuts, Bolts
Testing
The iMate / EKOS auto focuser worked very well. It’s a bit different with a lens as the in-focus position is near to the end of the focuser range. I reversed direction and set the initial move to 5 which worked well.