Counting matching models…
Inspired by a comment from @deadCXAP_2453033 on my previous helical fidget. Convertible into a “fidget king” (ring?) or a fidget snake! In addition to simply spinning the gears, this fidget can perform other unique tricks with certain…
Upgrade your workspace with one of these sturdy and elegant pen/pencil holders, featuring four designs of distinct grid lattice diamond-like patterns. This stylish organizer is optimized for 3D printing and ideal for storing pens,…
Print Instructions If you want to place water in this vase, make sure to read the prusa guide for water tight prints. I actually didn't try printing this in vase mode, but it would probably be very flimsy. Filament: PLA or PETG Print…
Finally, a perfectly meshing printed helical gear shaft for the Bambu P1/P1P extruder stepper motor — reverse-engineered, tested, and proven. After extensive measurement, iteration, and real-world testing, this design solves the notorious…
Print Instructions: (Can go finer/smaller but don't go any larger) 0.2mm layer height 0.4mm nozzle. 0.3mm layer width
A fidget built around a dual direction helical gear that can mesh with both CW and CCW helical gears. This allows for CW and CCW regular helical gears to be placed next to each other and spin in opposite directions for a cool effect.…
Enjoying this model? If you download it, please consider leaving a like and hitting that follow button. It’s the best way to say thanks for the free design! Thank you! Mate / Kkmmedia3D Introducing the "Modern Helical Gold Vase & Dried…
Printing Make sure the first layer of gears adhere nicely to the build plate, to make sure the gears will mesh and spin smoothly. Assembly For the 2 gear version, simply print the file, mesh the gears first and then slide them onto the…
Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…
A satisfying print-in-place fidget working right off the print bed that you won't put down. Super fun, but small enough to put in your pocket. Originally I made not to be a torture test but after realizing how hard it is to print I made…
Practical pen holder with helical stairs like trays for small object that are always lying on your desk.
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount print with TPU / TPC for better flex and sealing TPU: shore 60-70D, TPC 30D or 40D gasket optional when printed with TPU foam like Varioshore, beware of changing sizes mount…
This is a set of 13 replacement HELICAL gears with different outside teeth amount. Size of the internal hole for the axle: 3.2mm Module of teeth: 2,5mm Pressure Angle: 20° Helix Angle: 20° Let me know if you require any other gear to be…
Here is a universal helical extrude library for OpenSCAD I wrote a while ago. You can extrude any polygon in the form of [[x1,z1],[x2,z2],[x3,z3],...] It has 5 different helix generation modes: pitch / height pitch / revolutions…
It's a double part, impossible pass through, barrel shape box. Each part has a print in place rotating handle. The handle spins and it can be collapsed on each part, so it can be used as a container or as a mini vase. Can also dub as a…
Double Helical Gear Mod on BFI (Beefy Front Idler) It has been modified based on Diyshift's BFI Gears user mode I made it to deliver better torque and prevent it from being twisted than normal gear The single-helical gear was found to…
Pot with a particular design, made from a helical gear, for fake plants or succulent plant, not adapt for real plants because without holes on the bottom, however on request I could make the dedicated model. Printed in PLA, definition 0,2…
Inspired by a comment from @deadCXAP_2453033 on my previous helical fidget. Convertible into a “fidget king” (ring?) or a fidget snake! In addition to simply spinning the gears, this fidget can perform other unique tricks with certain…
This is a simple spacer for building a 1.5 GHz helical antenna suitable for receiving maritime (Std-C) and aviation (ACARS) broadcasts from the INMARSAT series of geostationary satellites. A video explaining the antenna construction can…
The DNA edges of the bucky ball represent the rapidly closing divide between biology and technology. 3D printing is making serious progress in bioprinting, and algorithms have come to pervade every facet of human society. The base…
helical planetary gear 36T fat bike wheel motor dimensions 48.8mm X 11mm bearing 7.94mm X 22mm for electric bike
Prints The lens support and focuser support are parametric designs in Fusion 360. The CAD files are included to enable modifications or remixes. I printed at 30-40% infill with 4 perimeters from PETG. Two of these parts use brass heat…
A fully parametric spring optimized for 3D printing. Modify just a few main parameters, and the geometry adapts automatically. To be able to change parameters, go in timeline between the groups. Change Parameters. Go in timeline to the…
0.2 mm layer may want to scale up to work better also drilling the gears out will make them spin better
I've printed this model in PETG, no brim or support required.
I fixed most of the problems with the first version so please leave a make and let me know how well the new one works.
This aluminum flexible coupling is designed to connect and transmit torque between two shafts, particularly suitable.
I designed this part for my Grass shear DUM111SXY This is a Makita printable replacement part Part Number: 227728-7 / 227730-0 47 teeth Print setting: - PETG or PLA - To give it more strength use 4 Wall Loops
I was tired of using the disc of my Soko Helical to setup the pitch on my SoXoS 550 , so I designed a fitting part that I can attach the Soko gauge to and mount to my SoXoS 550. Should probably fit other 550 size RC helicopters as well. I…
So as said its a Double Helical Gear with two moshed together one Clockwise and counter then I just subdivided these two Gears and added a cylinder in the middle it has the same property's of a Double Helical Gear but now it can just be…
Helical gear pencil holder Be sure to print Gear1 and Gear2 if you want to rotate them in the stand. They are NOT interchangeable.
10:25 gear ratio (helical gears) fun to play with too
I bought a GE Profile Opal Nugget Ice Maker second hand and found that it had a bad helical drive gear. This is the only plastic gear inside the gear box and mates with the helical shaft on the drive motor. I have only printed it in…
Bracket to mount the CUAV C-RTK 2HP Hellical GPS Antenna . The antenna press fits, use M5 Screws to mount the bracket. The Antenna is raised to allow a radius bend with the SMA cable Print in PETG.
Sorry…this is a what? Every spring Jews around the world gather for a ritual meal to retell the story of the Exodus from Egypt. The meal contains six symbolic foods that are placed on a special plate . This plate has always been…
Remake to include simple hole at the back for a low cost LED grow lamp from Amazon. Sized to match
I have created it with TPU and 0.6mm nozzle. The 0.4mm nozzle may be a better choice. I have also uploaded gcodes for 0.6mm/0.4mm/TPU/PLA for MK3S+. I you are interested in other combinations let me know. You may also create your own…
Simple Helical Gear Bead for Hoodies just slip it over the drawstring like on a hoodie :) 3 different hole sizes, I can add more if needed! I used the 5.4mm Hole for my hoodie :)
This is a design for an L-Band Helical Antenna support structure (scaffold) that prints completely flat, thus avoiding the printing issues that can crop up with other designs featuring tall skinny elements. It is based up on the…
Механизм состоит из двух частей, чтоб упростить печать: Втулка вращения на которой можно зафиксировать шестерню Внутренний фиксатор венчика Шестерня Шестерня надевается на втулку до специального упора. Втулку можно из ABS, PetG и более…
Helical planetary gear fidget spinner and gyro combo. Best of both worlds with a geared fidget spinner and a gyro on the outside. Print in place so no assembly required. For best results. I have found printing in PLA using flat/matt color…
merci à l'auteur du modèle original, je l'ai adapté pour l'entretien facile de mon imprimante 3D
I've been playing around in CAD trying to come up with a knurling pattern that 3dprints well and offers decent grip. I liked the aesthetics of this pattern so I decided to make a few storage cups/bins to test it out in person. I really…
EDIT: Either printables image compression or the browser I'm viewing this in really has trouble with showing this pattern without it looking very ugly and noisy. View the 3d model directly to get a better sense of what the output will…
its an ornithopter spin gears for wings to flap
Helical flexible couplers are just crying out to be 3D printed. But to avoid steep overhangs with a standard coupling design, you need a really high helix angle, which makes it fairly stiff in bending (bad) and not-so-stiff in torsion…
Out of sheer academic interest I wanted to see if I could print a particular compression spring with rectangular X-section sans supports - i.e., one with 48mm OD, 10 mm width and 8mm pitch in PETG. I succeeded but only with a bed…
An improved version of the rocket spiral passthrough fidget, re-designed and renamed as Helical Rocket Passthrough Fidget because I am pedantic about using the correct geometric names for shapes! The size, shape and thickness of the legs…
There basically are two designs included in this suite. One has separate legs and the other design does not. One is a two wall version not intended to be printed in spiral vase mode. All the others are intended to be printed as a…
Vase with Helical Pattern A modern decorative vase with an elegant twisted surface pattern. Perfect as a centerpiece, desk decoration, or to showcase artificial flowers. The design is fully optimized for 3D printing, especially in vase…
General Created this helical antenna for L-band and to detect OH radiation from supernova CAS A . can be used on balcony without reflector. Antenna center frequency is 1665 MHz, bandwidth is around 1550–1780 MHz. Printed in sections of 4…
This sculpture uses a helix structure welded to two toruses. It could be an artistic design, a trophy, an award, or a shelf ornament. This model was NOT created with any use of AI. Unfortunately, it will need supports and good bridging…
Engranaje helicoidal doble “A” y “B” para rodamiento 6000 2rs
This is a cylindrical sleeve featuring continuous helical (spiral) slots cut through the wall, creating a lightweight lattice that guides airflow/fluids and looks visually striking. Typical uses include teaching CAD/3D-print techniques,…
The focuser has a female M42 thread on the telescope side and a male M42 thread at the eye piece/camera end. The focus travel is approximately 15mm in 3 full turns. There are 1mm increment marks on the focus ring. The sliding core and…
This came into existence to continue testing the limits of one of my 3D printers AND to continue developing advanced CAD skills. These were not generated by any form of gear generating software. (Where is the fun in that?) This was…
Having previously made a holder with helical cutouts by diffing a gear from a tube, I decided to remake it via OpenSCAD to make it parametric, and it works with OpenSCAD's built-in customizer. Requires MCAD dev and scad-utils .
I wanted to be able to attach 1.25" oculars to my old newton 114mm. So I decided to modify the base of https://www.printables.com/model/265768-non-rotating-helical-focuser-with-collet-for-hadle Diameter of my tube is 140cm. I add STEP…
Summary: This is a custom-designed Helical Gear with 28 teeth and a 15-degree helix angle. It is suitable for various mechanical projects and hobbyist applications. Technical Specifications: Type: Helical Gear Number of Teeth: 28 Helix…
Hi Everybody! This project comes as a remix of Incept 3D 's Leg prosthetic. Disclaimer: This prosthetic leg design is an experimental prototype and is provided as-is for educational and developmental purposes only. It is not certified,…
Warning: 289mm tip to tip on base, smaller version now available too. In fact I prefer the look of the smaller one.
Remixed to my selfsourced Voron Trident with 4020 profiles.
Just combined a couple of models to get the result i was looking for
Upgrade your workspace with one of these sturdy and elegant pen/pencil holders, featuring four designs of distinct grid lattice diamond-like patterns. This stylish organizer is optimized for 3D printing and ideal for storing pens,…
Technical details: Number of teeth: 31 Gear type: helical Outer diameter: approx. 51.3 mm Gear width / height: approx. 50.5 mm Bore: hexagon 6.1 mm (flat-to-flat)
print time: 1h 30min filament cost: 3m 1 gear size: 30mm spins freely check my other prints. I will be glad full for some feedback ;) enjoy
This project is a helical vertical-axis wind turbine designed specifically for these conditions. It is not optimized for maximum energy output. Instead, it follows a quantity over quality approach. Since this wind is low quality, but many…
I wanted to learn to make threads for more complex projects and this started as a worm gear that then became a fidget toy. Printer: Elegoo Centauri Carbon Elegoo Rapid PLA + .2 layers .2mm of xy compensation on each part No supports 15%…
Print Instructions If you want to place water in this vase, make sure to read the prusa guide for water tight prints. I actually didn't try printing this in vase mode, but it would probably be very flimsy. Filament: PLA or PETG Print…
The perfect way to store 12 standard nozzles or to attach to a giant printer
Finally, a perfectly meshing printed helical gear shaft for the Bambu P1/P1P extruder stepper motor — reverse-engineered, tested, and proven. After extensive measurement, iteration, and real-world testing, this design solves the notorious…
Print Instructions: (Can go finer/smaller but don't go any larger) 0.2mm layer height 0.4mm nozzle. 0.3mm layer width
A unique 3D printable creation — this Helical Gear Tower, Print in Place, Five Herringbone Gears, Vertical Kinetic Sculpture Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File…
so i made these helical bevel gears in fusion 360, did the whole spiral tooth profile manually which was kinda pain tbh. bevel gears are basically how you transfer rotation when two shafts meet at an angle, like 90°. and helical ones are…
This is my take on Andrew Deml's gear fidget. I changed the axel holes in the body to be square, or diamond shaped and made the axels have the same ends. I also remodeled the body to allow for printing without supports. I used a brim on…
Stylish box to organize stuff on your desk. Print instructions Category: Organization Print Settings Printer Brand: LulzBot Printer: TAZ 6 Rafts: No Supports: No Resolution: .38 Infill: 20 How I Designed This
--- 04.01.20 update II --- Added first test image. No light leaks! Even without any light foam seals around the film holder. Should still be added though, to increase distance to lens, so that infinity is in focus. Infinity is now in…
A fidget built around a dual direction helical gear that can mesh with both CW and CCW helical gears. This allows for CW and CCW regular helical gears to be placed next to each other and spin in opposite directions for a cool effect.…
Use 7t gear in middle, 8t gear on both sides of it and 14t gear on the ends. Glue the 14t to the m5 bolt. Use m3x8 for the gears. Note: T7 gears walls are too thin and will break.use gears in the fixed separate stl
Lego Technic complatible double helical (herringbone) gears. The dimension axle hole for the gears were taken from the Lego Technic compatible gears with custom sizes with axle holes able to slide along the axels.
Enjoying this model? If you download it, please consider leaving a like and hitting that follow button. It’s the best way to say thanks for the free design! Thank you! Mate / Kkmmedia3D Introducing the "Modern Helical Gold Vase & Dried…
Printing Make sure the first layer of gears adhere nicely to the build plate, to make sure the gears will mesh and spin smoothly. Assembly For the 2 gear version, simply print the file, mesh the gears first and then slide them onto the…
The inner diameter of the pot is about 5" and the outer diameter is about 5.325", the drain hole is abt. 1/2", and the tray's outer diameter about 6.675". Recommended settings: .2 layer w/ adaptive layer height for drain hole pot 7%…
Attachment to allow connecting Ballanux's helical focuser https://www.printables.com/model/265768-non-rotating-helical-focuser-with-collet-for-hadle for the Hadley telescope to Fantastic Plastic Person's 80mm Refractor…
This herringbone gear mechanism uses double-helical gears for smoother engagement and continuous motion. The angled tooth design helps reduce backlash and creates a visually satisfying movement when turning the gears. It features…
This is a highly optimized, fully parametric Compliant Helical Shaft Coupling designed specifically for 3D printing and precision mechanical engineering applications. Using an engineered helical flexure element, this component compensates…
I'm lazy. I don't like to wash my eggs until I need them. Unfortunately, my chickens don't have that problem, they just keep laying. So I needed a larger holder so I could go longer between washings. This model fits the bill. Up to 30…
I wanted a way to vary the leverage of the mousetrap on the axle so I made this to place on the axle and wrap the string around
A bunch of 1700mhz RHCP helical antenna's from DEREKSGC that I rendered out since scad can take some time rendering models. I have also included ground planes that you need to cover with aluminum or copper tape to act as a…
Prusa Slicer Settings: 0.2mm layer height. Infill 10%. PLA material. Ironing: Topmost surface only. Flow rate: 30%. Spacing between passes: 0.16mm. Ironing speed: 100mm/s Fuzzy skin: Outside Walls Thickness: 0.1mm Point distance: 0.1mm
