PNX CHG-3617 – 36:1 Compound Helical Gearbox for NEMA 17
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printable 36:1 compound helical gearbox designed for NEMA 17 stepper motors and robotic joints.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 78
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
PNX CHG-3617 — 36:1 FDM Compound Planetary Gearbox for Robot Joints
https://youtube.com/shorts/Z76G_8fSFTo?feature=share
Project Overview
PNX CHG-3617 is a 36:1 FDM compound planetary gearbox for robot joints, designed to mount directly to a NEMA17 stepper motor.
The gearbox uses compound planet gears in which the upper and lower gears have different tooth counts but are integrated into a single rigid part. This makes it possible to achieve a high reduction ratio within a relatively short axial package.
The design is intended for rotating robot joints such as the base, shoulder, elbow, and wrist. The main structural parts and gears can be produced using FDM 3D printing.
The gearbox is also designed to be serviceable. The gears, output section, and housing can be separated so that worn or damaged printed parts can be reprinted and replaced individually.
Main Specifications
Model: PNX CHG-3617
Reduction ratio: 36:1
Motor: NEMA17
Gear module: Module 1.0
Pressure angle: 20°
Compound planet gears: 3
Planet arrangement: 120° equal spacing
Output bearing: 30 × 42 × 7 mm
Input sun gear: 12T
Upper planet gear: 24T
Fixed ring gear: 60T
Upper sun gear: 18T
Lower planet gear: 18T
Output ring gear: 54T
Recommended gear material: PETG
Manufacturing method: FDM 3D printing
The upper 24T gear and lower 18T gear are printed as one compound planet gear, and three compound planet gears are arranged at 120° intervals.
Gearbox Features
1. 36:1 Compound Planetary Reduction
The 12T input sun gear mounts directly to the NEMA17 motor shaft and acts as the gearbox input.
The input rotation is transferred through the three compound planet gears. The different upper and lower gear combinations generate the final 36:1 reduction ratio at the output ring gear.
The main purpose of this design is to achieve a high reduction ratio in one compact mechanism without stacking multiple separate reduction stages in a long axial arrangement.
2. Three Compound Planet Gears
The gearbox uses three compound planet gears arranged at 120° intervals.
The three planets provide multiple gear-mesh points for torque transmission and help keep the output ring gear centered during rotation.
Because FDM parts may contain dimensional errors and material deformation, the three planets may not share load perfectly equally.
After assembly, verify that all three compound planets mesh naturally and that no single planet is excessively tight or repeatedly binds at a particular angular position.
3. Helical Gear Geometry
The gear teeth use a helical profile.
Compared with spur gears, the tooth engagement is more gradual. The goal is to reduce sudden meshing impact, vibration, and noise that can occur in FDM-printed gears and to achieve smoother operation.
Actual operating behavior will depend on:
XY dimensional accuracy of the printer
layer height
extrusion amount
filament characteristics
gear tooth surface quality
lubrication
bearing alignment
motor shaft alignment
assembly tolerances
4. Bearing-Supported Output
The output section uses a 30 × 42 × 7 mm ball bearing.
The output gear and output bearing part are separate components and are fastened together with M3 screws.
The bearing is positioned close to the output section so that external loads from the robot link can be transferred to the housing through a short structural load path.
5. Modular and Serviceable Structure
The major gears and structural parts are designed to be separable.
If an FDM part becomes worn or damaged, the entire gearbox does not need to be reproduced. Only the affected component can be reprinted and replaced.
Mounting the Gearbox to External Structures
Separate drawings are included showing how to mount the gearbox output to a robot link or another structure, and how to mount the NEMA17 motor and the lower side of the gearbox to an external frame or other component.
Use the supplied drawings when designing:
output-side mounting interfaces
output bolt patterns
robot-link mounting surfaces
motor-side mounting interfaces
lower gearbox mounting points
custom brackets and adapters
For the most accurate integration, import the supplied STEP assembly into your CAD software and check dimensions and interference directly before designing the mating parts.
Required Parts and Fasteners
Main Components
NEMA17 stepper motor
30 × 42 × 7 mm ball bearing
Complete set of printed PNX CHG-3617 parts
Grease compatible with plastic gears
Fasteners
NEMA17 Motor to Gearbox
For the standard assembly without a rubber pad:
M3 × 8 mm hex socket countersunk screws
If a rubber pad is placed between the motor face and the gearbox mounting surface:
M3 × 12 mm hex socket countersunk screws
Use the M3 × 12 mm screws only when the additional rubber pad thickness is present.
Heat-Set Inserts
For all designated large insert holes except the motor mounting section:
M3 × 5 mm heat-set threaded inserts
Lower Gearbox to Upper Gearbox
Use:
M3 × 15 mm hex socket countersunk screws
Output Gear to Output Bearing Part
Use:
M3 × 8 mm hex socket countersunk screws
Recommended Printing Settings
Gears
The gears directly affect gearbox operation, so they should be printed more precisely than the housing parts.
Recommended settings:
Material: PETG
Nozzle: 0.4 mm
Layer height: approximately 0.20 mm
Use sufficient perimeters/walls
After printing, inspect the gears for:
stringing
burrs
elephant foot
over-extrusion
debris between teeth
warping
deformation around center holes
Even small strings or protrusions between teeth can increase resistance after assembly.
Housing and Larger Structural Parts
Larger structural parts can be printed with a larger nozzle.
Example settings:
Material: PETG
Nozzle: 0.6 mm
Layer height: approximately 0.30 mm
Use sufficient perimeters/walls
Bearing seats, insert holes, and motor mounting features may print differently depending on the machine, so verify the actual printed dimensions before final assembly.
Assembly Procedure
1. Install the M3 × 5 mm Heat-Set Inserts
Before starting the mechanical assembly, install M3 × 5 mm heat-set threaded inserts into all designated large insert holes except the motor mounting section.
Install each insert as perpendicular to the surface as possible.
Check the following:
the insert is not tilted
the insert is not pushed too deep
the insert does not protrude excessively above the mating surface
the surrounding PETG is not excessively melted or deformed
an M3 screw can be threaded into the insert correctly after installation
Do not install M3 × 5 mm heat-set inserts in the motor mounting section.
2. Attach the Input Sun Gear to the NEMA17 Motor Shaft
Install the 12T input sun gear onto the NEMA17 motor shaft.
Make sure the sun gear is not tilted or mounted eccentrically.
Input-sun eccentricity can cause uneven meshing with the three compound planets, increased vibration, noise, and rotational resistance.
3. Attach the NEMA17 Motor to the Lower Gearbox
Mount the NEMA17 motor, with the input sun gear already installed, to the lower gearbox section.
Standard Assembly
Use:
M3 × 8 mm hex socket countersunk screws
When Using a Rubber Pad
If a rubber pad is placed between the motor face and the gearbox mounting surface, use the longer:
M3 × 12 mm hex socket countersunk screws
The longer screws are required because of the additional thickness of the rubber pad.
Do not fully tighten one screw first. Tighten the screws gradually in an alternating pattern so that the motor remains square to the gearbox.
After tightening, confirm that the input sun gear remains correctly centered in the gear train.
4. Mark the Three Planet Positions at 120° Intervals
Before installing the compound planet gears, mark three positions at 120° intervals using a permanent marker, paint marker, or similar marking tool.
These marks are used as reference points to position the three compound planet gears evenly and improve assembly alignment.
Do not rely only on visual estimation. Marking the three locations first makes it easier to keep the planet positions consistent during assembly.
5. Install the Three Compound Planet Gears
Install the three compound planet gears using the 120° reference marks made in the previous step.
Each compound planet should mesh naturally with the input sun gear and the surrounding ring gear geometry.
Do not force a planet into place if one gear is noticeably tighter than the others.
Check:
the 120° reference marks
equal planet spacing
burrs or strings on the gear teeth
elephant-foot deformation
dimensional print errors
input-sun eccentricity
overall planet alignment
After all three planets are installed, move them by hand and confirm that the gear engagement feels natural.
6. Install the Upper Sun Gear
After the three compound planet gears are correctly positioned, install the upper sun gear in the center.
The upper sun gear must engage with all three compound planets simultaneously.
Do not force one side into position. Slightly adjust the three planets as necessary until the upper sun gear seats naturally.
After installation, confirm that the upper sun gear and all three compound planets can move as intended.
7. Install the Output Bearing
Install the 30 × 42 × 7 mm ball bearing into the upper output bearing part.
Do not force the bearing into the seat while it is tilted.
Confirm that the bearing is fully and correctly seated in its intended position.
8. Join the Output Gear and Output Bearing Part
Attach the output gear to the output bearing part using:
M3 × 8 mm hex socket countersunk screws
First start all screws lightly to align the parts.
Then tighten the screws gradually in an alternating or opposing pattern.
Check that:
each countersunk screw seats correctly
the output gear and bearing part remain aligned
the PETG is not deformed by excessive tightening
This joint is an important torque-transmitting connection, so make sure every required screw is installed and properly seated.
After fastening, check that the output section rotates smoothly.
9. Apply Grease to the Gear Teeth
Before closing the gearbox, verify that the gears mesh correctly and apply grease to the active tooth surfaces.
Use a lubricant that is chemically compatible with PETG or the plastic material used.
There is no need to completely fill the gearbox cavity with grease.
Apply enough lubricant to create an even coating over the active gear teeth.
10. Join the Lower and Upper Gearbox Assemblies
Join the completed lower motor/gear assembly with the upper output/bearing assembly.
Align the gear train and center positions carefully so that the two halves come together without excessive force.
Use:
M3 × 15 mm hex socket countersunk screws
to fasten the upper and lower gearbox sections.
Recommended tightening procedure:
Start all M3 × 15 mm screws lightly.
Do not fully tighten one screw first.
Tighten opposing or alternating screws gradually.
Check that the gap between the upper and lower sections closes evenly.
Perform the final tightening only after the assemblies are fully seated.
Excessive screw torque can distort the PETG housing and change the gear center distance, increasing rotational resistance.
Final Fastener Inspection
After assembly, recheck all fasteners and inserts.
Verify:
M3 × 8 mm hex socket countersunk screws at the motor mounting section
M3 × 12 mm hex socket countersunk screws if a rubber pad is used
M3 × 8 mm hex socket countersunk screws between the output gear and output bearing part
M3 × 15 mm hex socket countersunk screws joining the upper and lower gearbox sections
all M3 × 5 mm heat-set threaded inserts
Make sure no screw is loose and no heat-set insert rotates or pulls out.
Manual Rotation Check After Assembly
Before applying motor power, rotate the gearbox manually through several revolutions.
Check that:
all three compound planet gears rotate correctly
the planets remain positioned at the intended 120° locations
there is no repeated binding at a specific angle
the input sun gear remains centered
the upper sun gear meshes correctly
the output section rotates smoothly
the bearing does not move inside its seat
screw heads or screw ends do not interfere with the internal gears
heat-set inserts do not rotate or pull out
there is no abnormal gap between the upper and lower housing sections
Only begin powered testing after smooth manual rotation has been confirmed.
Initial Powered Testing
Do not begin with maximum speed or heavy load.
A recommended test sequence is:
No-load low-speed rotation
→ Forward and reverse rotation
→ Gradual speed increase
→ Backlash and noise check
→ Gear and bearing temperature check
→ Light-load test
→ Robot-link load test
The 36:1 reduction ratio can be checked approximately by confirming that about 36 input revolutions produce about 1 output revolution.
Important Notes
1. Mark the Planet Positions at 120° Before Installation
This is one of the most important assembly steps.
Before installing the three compound planet gears, mark three locations at 120° intervals using a permanent marker or similar marking tool, and install the planets according to those reference marks.
Poor alignment can cause one side of the gear train to mesh too tightly or increase rotational resistance after assembly.
2. Use the Correct Motor Screw Length
Without a rubber pad:
M3 × 8 mm hex socket countersunk screws
With a rubber pad between the motor and gearbox:
M3 × 12 mm hex socket countersunk screws
Do not mix up these two screw lengths.
3. Heat-Set Insert Locations
Do not install M3 × 5 mm heat-set inserts in the motor mounting section.
Install the M3 × 5 mm inserts only in the other designated large insert holes.
4. Use the Specified Screw Lengths
Using screws that are longer than specified may allow the screw ends to protrude into the gearbox and interfere with internal gears or rotating parts.
Always check for internal interference after assembly.
5. Do Not Overtighten Screws
Excessive tightening can damage or distort PETG parts.
Possible problems include:
cracking around heat-set inserts
deformation of fastening areas
bearing-seat distortion
housing misalignment
changes in gear center distance
output-part deformation
Countersunk screws can generate wedging forces in the surrounding plastic, so do not apply unnecessary tightening torque.
6. Bearing Installation
Do not force the 30 × 42 × 7 mm output bearing into the seat while it is tilted.
After assembly, verify that the rotating output components do not continuously rub against the bearing outer race or shield.
7. FDM Dimensional Tolerance
This model is designed for FDM manufacturing, but identical dimensions cannot be guaranteed on every printer.
Pay particular attention to:
bearing seats
motor shaft holes
gear mesh clearance
M3 × 5 mm insert holes
M3 screw through-holes
motor mounting features
output mounting surfaces
If necessary, modify the supplied STEP file to match the dimensional behavior of your own printer.
8. Robot Application
Actual allowable link length and payload cannot be determined from the reduction ratio alone.
Performance will also depend on:
filament type
print orientation
layer adhesion
printer dimensional accuracy
gear tooth quality
bearing quality
heat-set insert installation
screw fastening
link length
joint acceleration
impact loads
operating temperature
Perform sufficient no-load and progressive load testing before installing the gearbox in a complete robot.
Included Files and Drawings
The uploaded package includes files for manufacturing, modification, and integration with other robot structures.
printable 3D models
complete gearbox STEP assembly
output-side mounting reference drawing
motor-side and lower-gearbox mounting reference drawing
major dimension reference images
Separate drawings show where the output should be attached to a robot link and where the NEMA17 motor and lower gearbox section should be attached to another structure.
Use these drawings when designing robot links, joint frames, motor brackets, or custom adapters.
For the most accurate dimensions, import the STEP file directly into CAD and measure the required geometry.
Project Purpose
PNX CHG-3617 is intended as a modular FDM robot-joint gearbox that can be manufactured, disassembled, modified, repaired, and reprinted using common 3D-printing equipment and standard hardware.
Actual performance will depend on the printer, filament, dimensional tolerances, lubrication, assembly quality, screw fastening, and applied load.
Perform sufficient testing after printing and adapt the gearbox to the requirements of your own robot structure and operating conditions.