1 / 3
M42 Twin Helix Non Rotating Helical Focuser — image 1
1 / 3

M42 Twin Helix Non Rotating Helical Focuser

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A helical focuser for telescopes and astronomical projects that will take 1.25" eye pieces or cameras with M42 threads.

Rating
5 / 5
Likes
13
Downloads
111
Makes
1
Views
426
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The focuser has a female M42 thread on the telescope side and a male M42 thread at the eye piece/camera end. The focus travel is approximately 15mm in 3 full turns. There are 1mm increment marks on the focus ring.

The sliding core and retaining ring should be glued together as shown in the section diagram. Also the focus ring should be glued on the outside of the focus collar. 

There are insert holes on the focus tube for M2 inserts if you want to use it with 1.25" eye pieces. You will have to ensure that the insert does not protrude into the inside of the focus tube.

I recommend printing this with a 0.1mm layer height. I printed the black parts in PETG-CF and the green focus ring was MATTE PETG.