M42 Twin Helix Non Rotating Helical Focuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A helical focuser for telescopes and astronomical projects that will take 1.25" eye pieces or cameras with M42 threads.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 438
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The focuser has a female M42 thread on the telescope side and a male M42 thread at the eye piece/camera end. The focus travel is approximately 15mm in 3 full turns. There are 1mm increment marks on the focus ring.
The sliding core and retaining ring should be glued together as shown in the section diagram. Also the focus ring should be glued on the outside of the focus collar.
There are insert holes on the focus tube for M2 inserts if you want to use it with 1.25" eye pieces. You will have to ensure that the insert does not protrude into the inside of the focus tube.
I recommend printing this with a 0.1mm layer height. I printed the black parts in PETG-CF and the green focus ring was MATTE PETG.