ExpressLRS Rubber-Ducky helical antenna template for 868MHz/915MHz
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed template for DIY small ExpressLRS 868MHz & 915MHz antenna. (almost 5K Thingiverse downloads before migration)
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 245
- Makes
- 0
- Views
- 1,500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed template for DIY small 868MHz / 915MHz antenna.
Total size 26x6mm alternative to 160mm dipole.
Use 0.7mm wire to make the antenna spring.
Use coaxial IPEX4 antenna cable, solder active, central wire to the spring (no passive part necessary, it should to be insulated to not touch active part). Don't expect that it will be perfectly tuned, but I have got hundreds meters of range with good RSSI and maximum available ExpressLRS LQ using 50mW transmitter (FrSky r9m). Use shrink tube to secure the antenna.
It is possible to use antenna without printed part but keeping the template inside of the spring will keep the shape unchanged and make it mo durable.
868MHz tested and working fine for FrSky r9mm flashed to ExpressLRS, 915MHz not tested as I haven't TX (I'm in EU). Use wisely at your own risk, make sure it works as expected before start.
All credits goes to https://e.pavlin.si/2018/06/29/small-normal-mode-antenna-for-868mhz/ .
Comments
- I did my best finding 915MHz version specification (9 turns for 12.5mm sprint and 4.5mm leg)
- it is important to leave unsoldered bottom 6mm straight part (before the hook)
- solder wire to the hook (part inside template), not to the 6mm straight antenna part
- it is much easier to create sprint part of center coaxial cable making sure it has proper length, then secure it using insulation tape or shrink tube
- secure active antenna cable to make sure it will stay soldered (it is most important part)
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
200
Infill:
24
Filament: doesn't matter
Category: Electronics
