Apex Legends Raptor's Claw Heirloom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can't get the raptors claw in game so I modeled my own!
- Ocena
- 4,667 / 5
- Polubienia
- 74
- Pobrania
- 616
- Wydruki
- 2
- Wyświetlenia
- 3134
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
Can't get the raptors claw in game so I modeled my own!
I positioned all the handle pieces in the intended orientation to minimize the need for supports. Only 2 of the handle pieces need supports but the areas where supports touch are hidden when fully assembled as to not show blemishes.
Printed in PLA with 10% gyroid infill and 3 walls.
To Assemble I included pins for a permanent fixture with glue. The pins are a pretty snug fit I printed a version with them and had to squeeze them into place by bonking the pins gently.
Alternatively I spaced the holes for M3 screws just big enough to cut threads into the plastic. Screws needed are:
10 M3x12
7 M3x8
I made it to screw in from both ends so that they would meet in the middle holding everything together. Only the blade hole needs a single M3x8