Apex Legends Raptor's Claw Heirloom
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can't get the raptors claw in game so I modeled my own!
- Rating
- 4.667 / 5
- Likes
- 74
- Downloads
- 624
- Makes
- 2
- Views
- 3,176
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
Can't get the raptors claw in game so I modeled my own!
I positioned all the handle pieces in the intended orientation to minimize the need for supports. Only 2 of the handle pieces need supports but the areas where supports touch are hidden when fully assembled as to not show blemishes.
Printed in PLA with 10% gyroid infill and 3 walls.
To Assemble I included pins for a permanent fixture with glue. The pins are a pretty snug fit I printed a version with them and had to squeeze them into place by bonking the pins gently.
Alternatively I spaced the holes for M3 screws just big enough to cut threads into the plastic. Screws needed are:
10 M3x12
7 M3x8
I made it to screw in from both ends so that they would meet in the middle holding everything together. Only the blade hole needs a single M3x8