1 / 11
Art Deco Da Vinci brush soap tray / holder with ventilation — zdjęcie 1
1 / 11

Art Deco Da Vinci brush soap tray / holder with ventilation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this Da Vinci soap tray in art déco style. Files print very well and & use minimal supports.

Ocena
5 / 5
Polubienia
31
Pobrania
63
Wydruki
1
Wyświetlenia
603
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Public Domain

I created this Soap Tray in decorative style.

It's easy to print model made for FDM printing with basic PLA.

All colored plastic pieces are divided so you don't need to use multi-material print (check notes under FILES category).


You can stick some thin brushes into the soap tray.
Water can also evaporate through these holes, they also function as ventilation.
 

Filaments used: BLACK PLA & COPPER PLA from SUNLU.

Hardware used:

  • BODY + COVER: Requires 2x M5x12screws (or shorter).
  • It doesn't matter what shape of screws you use - you can use HALFROUND / SOCKET type
  • Optional: You can add Felt pads / rubber pads under the body if you don't like scratched tables :)
  • If you like scratched tables I suggest to glue sanding paper 40 grit for more scratches lmao

You need to print the Body piece with supports - I advise to use tree / organic supports.

 

Whole kit printed on PRUSA MINI+ @0.25mm Layer Height.

Total Print Time: about 12+hours (yes, it's correct - the body takes the most time…)

 

Any questions? Ask me in the comments. I visit Printables regularly.

If you have any suggestions, let me know. I can do similar models if you provide screenshots.

 

Be creative :) 

Tagi