1 / 2
GeeekPi P33 M.2 NVME PoE+ Pi5 Hat PiRack Modular Tray — zdjęcie 1
1 / 2

GeeekPi P33 M.2 NVME PoE+ Pi5 Hat PiRack Modular Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pi Rack module to hold pi 5 with GeeekPi nvme and poe+ hat.

Ocena
4 / 5
Polubienia
15
Pobrania
133
Wydruki
2
Wyświetlenia
1391
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have two pi 5's on my pi server rack and both of them have the poe+ and nvme hat. This hat adds a challenge that it is just as long as the pi PCB itself and sits very high which required heavy remixing. I recommend longer screws to be used to connect module to pi 5 than the short screws that come with the GeeekPi hat. GeeekPi hat for reference: https://www.amazon.com/GeeekPi-Official-Active-Raspberry-Support/dp/B0D8JC3MXQ 

Feel free to tinker: https://www.tinkercad.com/things/aAnZM8gScHy-geeekpi-p33-m2-nvme-poe-pi5-hat-pirack-modular-tray 

Tagi