1 / 2
Mini Protean Receiver
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Mini Receiver Unit!
A replacement receiver piece for Flygonial's Protean blaster, including a new cage for mini-sized flywheels (pulsar/hurricane). Assembly and wiring is the same as the original Protean, and you will need a mag release and mag ejector piece from the original Protean.
Motor covers and rails attach to using M3x8mm screws and 5mm M3 brass inserts. You will need 6 total screws+inserts.
Prints have not been exported in best orientation (sorry!), and the magwell is to be printed upright with supports along the lower rail area.