61 modeli
A series of flywheel cages for the gryphon that use either hurricane/pulsar or banshee Jr flywheels. Each type comes 32.5, 33, and 33.5mm crushes and two different body types: a standard version modeled after the regular gryphon cage and…
Scaled down version of the Pulsar Xlite to mini dimensions. It's not as precise as a real 3D scan but should be good enough for shape testing as an accessible model is not available at the time of writing. Luckily, the the mini is almost…
This is a remix of some of the components for the board game Clank in Space by Clank! In Space Organizer (incl. both expansions) by Fabmaszter - https://www.thingiverse.com/thing:4578598 It fits the base game, the Apocalypse expansion,…
downscaled version of the Pulsar X2V2
3D printable piece, designed to work with the flywheel puller metal part made by Fetteworst, to pull any Daybreak, Kepler or Pulsar wheels (or any other wheels with the same top geometry) off a motor shaft, without risking bending the…
Cable hook for the Type 2 plug holder of the Wallbox Pulsar EV charger The hook part rests on top of the plug holder do distribute the weight of the cable Goes under the plug holder, obviously Should be printed with something more temp…
I used SLA printing You may neeed do manual changes to fit it perfectly
The cam adaptor is printed in hard filament, such as PETG, fit M2 brass inserts The TPU side plate adaptor has 2 walls. Unlikely to see infill as it is shelled, but I have it set to 15%. M2 x 8 bolts and washers for the TPU sideplate M2 x…
Announcement: You can now purchase this spinner from my shop. Check it out ! Update 2/20/2017: Added a version of the pins that features a twist-lock mechanism based on 2ROBOTGUY's ingenious design . They interlock for a nice, sturdy fit…
Printable bungee based on Pulsars micro bungee, use some double sided tape to attach it anywhere!
Side plates are printed in hard materials Rest are printed in TPU
with this tool you're able to open the case of your original vintage Pulsar P2 LED watch from the 70's to replace batteries etc. Print instructions Print it with Layer height 0.0.7 mm (Ultradetail) to receive best results. I used PLA, but…
I tried to model the new pulsar x2 from its pictures. I'm a begineer at modellin while modelling this i was trying to copy the shape to try it out. It is not the same with real one but I think its quite close. I used fusion 360 form tool.
INTRODUCTION This is another new header for 3D printers (FDM) very easy to print and assemble it. There is no need for any support and it is printed very easily. There is one piece build in methacrylate (but can be printed too), which…
Super easy print, just some boxes to fit everything in. At the end of the file name you will find a “note” to let you know how many copies you will need for each print.
Print in PLA 0.2 with minimal infill Lids with no bottom and top layers, 20% infill
My crude version of a N20 Woozi single stage pulsar cage. Ill maybe make a nicer v2 in the future. Tnx to woody for making the woozi files available for free. original STL:…
This provides a generous hook for a 5m or 7m tethered cable and allows the cable to pass through the back of the hook to stow the cable neater. For reference, the cable diameter is 13mm. Larger cables may be supported by scaling the model…
Remixed to allow fitment of the Pulsar wireless dongle underneath with cable route.
Cover for Wallbox Pulsar Plus, which helps protect the wallbox from moisture with an integrated cable holder. You will likely need to adjust the mounting holes to match the holes in your wall/mounting object. Print out at least in PETG if…
Pulsar Helion Thermal Monocular picatinny mount
The Pulsar-Class fast destroyer. the most notable ship of its class is the Gathering Storm.
This is a representation of the polarization of the radio signal coming from the pulsar PSR J0337+1715. This highly magnetized neutron star emits radio waves that sweep across the sky as it rotates hundreds of times per second. As we…
This is a set of models for the Nerf Gryphon by Flygonial. These files will let you use Worker Hurricane flywheels or Kuryaka Pulsar flywheels with the longer barrel and a lot of picatinny rail. The 33.5mm spacing is intended Hurricane…
I love my Pulsar, but it wasn't easy to carry around like a tricolate or V60. To prevent it from stretching out, the barrel shouldn't be in the base all the time, so I stacked the parts above each other and made this case. To have the lid…
This is a visualization of the first discovered radio pulsar, PSR B1919+21 . It was discovered by Jocelyn Bell Burnell in 1967. It's also the cover of Joy Division's debut album Unknown Pleasures . The visualization is a stacked line…
Made this out of TPU so I didn't have to order a new mouthpiece. Fits perfectly and snug without any magnets. Printed with about 65% infill and 4-5 wall loops for rigidity.
I recently made a safe stand to place my Pulsar Puffco Peak Pro Hydroslide Recycler Top Glass on when not in use or storing it away. The way I designed it makes it fit nicely, and the base platform keeps it from tipping over. I think it’s…
Do you struggle to find a flywheel setup that actually fits in your barricade? I experienced this time after time with numerous hobby flywheels just being far too large, so I created this NERF barricade flywheel cage for pulsar size…
I used NASA's data on some pulsar and converted it into a printable version. You can change filament on the correct layer (check your slicer's documentation for more info).
This is designed to be a simple holder for the NextLevel Pulsar's 80 mm diameter paper filters.
Based on the original design by gleavek. Pretty much exactly the same as the original, but just made the housing 2mm wider inside and outside to fit Radiomaster RP4TD receiver.
This is a simple insert for the board game Pulsar 2849. I downloaded several other available inserts but they were all too big for a fairly simple game and I decided to make one to use as little material as possible, but still be as…
Nissan Pulsar GTI-R
Scan of an Oral-B Pulsar vibrating bristle toothbrush.
The battery in the Oral-B Pro Expert Pulsar electric toothbrush should last 3 - 4 months. I designed this cover primarily to prevent an accidental activation of the toothbrush inside my bag. However, this cover also protects the brush (or…
THE PROBLEM The handle for the Next Level Pulsar is small, stubby , and difficult to use comfortably especially with one hand. DESIGN BRIEF Sized for adult hands: length, width, and room for the fingers. Slips over the existing handle.…
This is a stand for the Tally Pro and Pulsar that allows you to measure the flow rate using a Acaia Lunar or similar by allowing you to weigh the drink apart from the entire brew setup. Additionally, a new Filter 3.0 basket stand is…
This is a wall mount for the Oral-B CrossAction and Pulsar battery toothbrushes. It likely fits others. There's a screw hole so that it can be secured permanently to the wall. Remixed from…
If you strugle try to feed your pulsar extruder, when the hopper is almost full, this hopper will help reduce the preasure created by the linevac. I use a 30L compresor, without the hopper is almost imposble to recharge the inner cavity…
I use a Pulsar Xlite v2 Mini as an on the go mouse and was annoyed there wasn't a convenient place to put the dongle when not in use. So, I made a holder for the dongle. I imagine you could use this for other devices as well. Placement is…
I recommend a PETG print with 50% infill. I experienced warping with less due to the heat.
Did not work well with PLA in the summer. Maybe ABS or PETG would be a better option. I ended up ordering the real part. Uses 2x springs. I believe that I cut down pen springs, but I cannot remember.
TPU diffuser for EMAX Pulsar 2306 motors with LEDS. Kit comes with red, white and blue. Print this from any TPU for different light colors. Photo shows effect with Sainsmart purple TPU. Easy and quick to print, nice fit. TinysLEDs Print…
Simple improved replacement cover for the Pulsar Bluetooth speaker. Use the 3MF file or use the following settings: Strenght Wall Loops = 4 Top Shell Layers = 0 Bottom Shell Layers = 0 Sparse Infill Density = 20% Sparse Infill Pattern =…
print with High resolution
BIG UPDATE I wanted to make my Pulsa lighter, so I built a naked mod. It's still a work in progress, but it's already functional. It just uses the original screws, no extra parts needed. All you need is your mouse and the printed parts –…
Just simple tool that lets you undo and swap springs on Pulsar Turbo Wastegates (83.9mm external diameter with 8 slots). PSR NG45mm WG PSR NG50mm WG Had to make one as mine gone missing. Use 24mm wrench on the top, may need to block rest…
Part that holds the chain guard when you take off the wheel hugger
I recommend a PETG print with 50% infill. I experienced warping with less due to the heat.
This is a reconstructed battery lock for a night vision device. The original part broke after the device was accidentally dropped, and since the spare part is not commercially available, I redesigned it for 3D printing. Print orientation:…
I loved Metalbag's original insert, but I wanted something that would work for vertical storage, so I added a special spacer piece to fit around the rounded board. I also split the smaller trays into individual prints. Original files also…
Fills up the space under the thumb in Pulsar X2 mice (size 1 and 2) in case the edge bothers your grip Printing with 0.1 layer height is recommended Deburr an dlightly sand to remove sharp parts Stick to mouse using UHU patafix (can be…
I recommend a PETG print with 50% infill. I experienced warping with less due to the heat.
I recommend a PETG print with 50% infill. I experienced warping with less due to the heat.
Pulsar 2849 insert. Most of it is box straight to table. Each STL file name has the number that needs to be printed, and print profile is set to minimize filament (as was the insert). There is an optional tray/box with lid. 2 of them will…
