NiteRider Vmax clip for Planet Bike brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement clip for NiteRider Vmax tail lights, to make it compatible with Planet Bike tail light mounts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This clip replaces the original clip on the back of NiteRider Vmax (and possibly other) tail lights, making them compatible with Planet Bike light mounts.
I made this because I have many Planet Bike rear lights, and all my family's bikes have matching Planet Bike light mounts already. The NiteRider Vmax+ light is a great light, but requires its own similar looking but completely incompatible NiteRider mount. So this clip effectively turns the NiteRider light into a Planet Bike light, mounting wise.
PRINTING NOTES:
- This should be printed on its side (ie. when looking straight down, you see the C shaped profile of the clip), for strength.
- Use enough wall layers that there is no sparse infill, as this needs to be strong. I used Bambu P1S 0.20mm Strength preset.
- Supports are recommended, although YMMV.
- I used Bambu PETG-HF filament, which seems to work fine. Probably Nylon would be ideal, but I haven't tried that.
Let me know if this works for you, especially if you have another NiteRider light model!