1 / 5
12mm HEX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hi.
These are 12mm HEX designed specifically for Trx Fiesta rally wheels used on Bandit. Main point is the thickness (offset) of the HEX in such way, that front wheels are tucked to inside as much as possible (red hex photo), and rear are pushed to outside (black hex photo) while still having the wheels nut be securely on the shaft.
PSA: you dont need longer front axles for these wheels-with this HEX the stock is enough. PSA2: with HD components the front wheels rub a bit in full turn. I sliced a tiny bit off the steering block to mitigate it, see last picture.
S.D.G.