simple guitar plektron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
this is a simple guitar plektron which is a little thicker on the topside to reduce wear (I hope so) ;)
I recommend adding a name or logo to the top to increase grip. (avg. 0.3mm to stick out)
Keep in mind you ll have to use very thin sandpaper to get it smooth (its 0.46mm standard thickness on the bottom!)
still testing, works fine so far! ;)
update: the skull plektrons work, but are a little tricky to handle! update: added a "plain even plektron" - if u prefer this for customization
Size: ~ 30*35mm
if ur interested in the band 'lisa weint' (german & english Pop, Rock, Metal) plz visit their website: http://www.lisaweint.at/
Thx! ;)
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 3
Yes
Supports:
No
0.1 mm
Infill:
40%
Filament:
any PLA any
Notes:
this is a simple guitar plektron which is a little thicker on the topside to reduce wear (I hope so) ;)rnrnI recommend adding a name or logo to the top to increase grip. (avg. 0.3mm to stick out)rnrnKeep in mind you ll have to use real thin sandpaper to get it smooth (its 0.46mm standard thickness on the bottom!)rnrnstill testing, works fine so far! ;)rnrnrn
Category: 3D Printing